Litoclean EVO ACID DESCALER DETERGENT FOR USE ON CERAMIC COVERINGS. EFFECTIVE IN REMOVING CEMENTITIOUS GROUT RESIDUE AND EFFLORESCENCE. Litoclean EVO is a concentrated acid cleaner used for post-installation cleaning operations. The product, formulated with inhibited acids and specific detergents, replaces traditional acids with better results in the in-depth cleaning of newly installed ceramic coverings. 1.05 qts. (1 l) bottles (boxes with 12 pcs) Suitable for the rapid removal of cement residue and cementitious grouts, saline and limescale deposits, tempera and lime, from ceramic and porcelain tiles, porcelain stoneware, vitreous mosaics, terracotta, tumbled marble, etc., on interior and exterior walls and floors. If properly used, the product does not damage traditional cementitious grouts and can remove any superficial efflorescence build-up, restoring the grout’s consistent color. Shake well before use. The product is almost always used diluted. Dilute the product from 1:1 to 1:10 with cold water, depending on the type of material and dirt to be removed. Pour the liquid onto the surface being cleaned and distribute evenly. Let it work for about 5-10 minutes, then use an abrasive felt (item 109 GBNC) to remove any remaining residue or build-up. Remove any residual liquid from the surface using rags, a rubber squeegee broom or a wet vacuum cleaner. Finally, rinse well with water and dry carefully. • Do not use an overly concentrated product mix to avoid leaving any residue • In the case of grouted floors, it is advisable to wait at least 7 days after sealing before washing • Before use, protect doors, windows, rubber gaskets, furniture, taps and fittings, metal or PVC profiles and all surfaces that may be damaged by direct contact with the detergents • Change the rinse water frequently • In the case of accidental leaks, soak up the product using an absorbent material (paper, sawdust, vermiculite, etc.) and dispose of it in a suitable container • In the case of brushed marble surfaces, dilute the product in water to a ratio of 1:10, while in the case of tumbled marble surfaces, dilute the product in water to a ratio of 1:3 • Do not use the product on marble or other polished limestone materials as these may lose their shine • Perform a spot test on a non-visible area if unfamiliar with the material or if in doubt regarding its chemical resistance • Wear protective clothing during handling (rubber gloves, mask and goggles). Follow the instructions shown on the safety sheet Water-based product Suitable for removal of salt efflorescences Fairly non-aggressive on cementitious grouts. Does not alter the color of the joints Excellent cleaning power Pleasant fragrance Exempt from hazard classification for transport

Powered by TCPDF (www.tcpdf.org) • Do not use the product for applications not stated in this technical sheet • If in doubt, contact the Litokol S.p.A Technical Help Service. SAFETY INFORMATION Consult the product safety data sheet, available on request. PRODUCT FOR PROFESSIONAL USE IDENTIFICATION DATA Appearance Color Odor Customs code Shelf life Clear liquid Light blue Slightly scented 34029090 24 months in original packaging away from sources of heat and direct sunlight. Protect against frost. APPLICATION DATA Treatment time Flammable pH Specific gravity Application Acceptable application...