Litocem Pronto READY-MIXED READY-TO-USE NORMAL SETTING MORTAR FOR THE DEVELOPMENT OF SCREEDS WITH FAST DRYING AND CONTROLLED SHRINKAGE. SUITABLE FOR UNDERFLOOR HEATING. FOR INTERIORS AND EXTERIORS. PRODUCT WITH VERY LOW VOLATILE ORGANIC COMPOUND EMISSION RATE. Ready-mixed cementitious mortar made up of special hydraulic binders, organic additives and frost-resistant aggregates with selected and controlled granulometry. The product is characterised by normal setting times, fast drying and controlled shrinkage. ADVANTAGES / FEATURES • Product with very low volatile organic compound (VOC) emission rate. Complies with class EC1PLUS according to the EMICODE protocol and class A+ (Émission dans l’air intérieur - French Regulations) • Ready-to-use product that requires only the addition of water, thus preventing potential errors when batching the binder and selecting the aggregate • Ideal for the development of screeds in historical centres or inaccessible construction sites, where it is difficult to transport loose aggregates • Development of screeds with incorporated heating coils without the need for fluidifying additives • Quickly develops high mechanical strength, setting to light foot traffic in just 12 hours • Suitable for interior and exterior applications. • Suitable for the development of floating or bonded screeds in indoor and outdoor areas, ideal for subsequent installation of ceramic and porcelain tiles after 24 hours, natural stones after 2 days, wood, PVC, linoleum, carpet flooring after 4 days • Possibility to obtain a smooth surface finish • No shrinkage during setting, which prevents cracking phenomena 25 kg bags – 1,200 kg standard pallet INSTALLATION PLANNING Development of floating or bonded screeds in indoor and outdoor areas, ideal for subsequent installation in a short time. The only way to guarantee the long-lasting performance of ceramic and porcelain tile installations is to properly plan the process. It is therefore advisable to consult the national regulations in force in each country, for example standard UNI 11493 in Italy, which provides all necessary instructions regarding the choice of materials, correct planning, use and installation, so as to ensure all quality, performance and durability standards are safely met. Useful information can be obtained by consulting the Code of Good Practice for support screeds in interiors published by CONPAVIPER. Worksite conditions Check the suitability of the temperature, humidity, light conditions etc. at the time of the product’s application. Materials Check that all materials used for tiling (ceramic materials, levelling systems, adhesives, grouts, waterproofing products, etc.) are suitable for the intended use and have been correctly stored. Joints The size of the joints must be determined during the design phase, taking into account the following factors: • Type of screed Substrate prepa

• Architectural situation • Presence of elements of discontinuity • Type and format of covering to be installed • Ambient conditions • Intended use of flooring The purpose of divider joints is to allow the normal contraction and expansion of the set screed. They are generally created near: • Thresholds • Floors with area greater than 40 m2 • Areas with longest side longer than 8 metres • Presence of elements of discontinuity • Sudden change of the size of the system The UNI 11493 standard suggests the creation of fractionation joints from 5x5 m to 6x4m in the case of internal environments and...

In this case, after properly preparing the substrate (cleaning, degreasing, etc.) and just before pouring the mix, use a brush, large brush or broom to apply an even layer of bonding slurry made with Litocem Pronto, water and Idrokol X20, batched in the following proportion: Litocem Pronto: 3 parts by weight Water: 1 part by weight Idrokol X20: 1 part by weight Then apply the Litocem Pronto mix fresh-on-fresh on the bonding slurry. In the case of warm climates or wind, pay extra attention that the bonding slurry has not skinned over before pouring the screed, as this will compromise its adhesion....

Powered by TCPDF (www.tcpdf.org) IDENTIFICATION DATA Appearance Colour Customs code Shelf life Powder Grey 38245090 12 months in original packaging in a dry place. APPLICATION DATA Mix ratio Consistency of mix Mixing time pH of mix Specific gravity of mix Pot life Applicable thicknesses Applicable thicknesses Applicable thicknesses Application Application temperatures Set to light foot traffic Waiting time for installation of ceramic and porcelain tiles and natural stones Waiting time for installation of resilient and wood flooring Temperature of use How to clean equipment Consumption Water =...