Litocare Stone Glossy STAIN-PROOF IMPREGNATING AGENT WITH SEMI-GLOSS EFFECT FOR MARBLE AND GRANITE, TERRACOTTA AND ABSORBENT MATERIALS Litocare Stone Glossy is a stain-proof and dirt-proof protective impregnating agent with glossy finish for the treatment of medium-high absorbency surfaces. It creates a warm, wet effect, features excellent dirt-proof and stain-proof properties and offers surfaces a semi-glossy appearance. This treatment facilitates routine maintenance, reducing surface friction and inhibiting the penetration of dirt. 1.05 qts. (1 l) metal bottles (boxes with 12 pcs) The product is recommended for natural stones (marble, granite, cobblestone etc.) with non-glossy finishes, terracotta and materials with a medium-high absorbency rate. Shake well before use. Apply a thin and consistent film of pure product on a dry and clean surface using a brush, roller, airless sprayer or fleece. After application, wait approximately 5-10 minutes depending on the absorbency of the material, then spread the excess product evenly and leave to dry. After removing the excess product, wait at least 6 hours before opening the treated area to traffic. Particularly in the case of more compact surfaces, the product tends to create a semi-glossy film that can be brushed once dry using a white non-abrasive disc pad to enhance shine. • It is important to apply the recommended quantities and carefully remove any excess product within the indicated time frames to prevent greasiness. Always perform a spot test first to assess the result • Spread the product only on perfectly clean and dry surfaces • Do not use the product on wet or heated surfaces • Do not wash the surface within the first 24 hours of applying the treatment. Waiting up to 48 hours allows the product to firmly adhere to the substrate for a longer-lasting effect over the years • In the case of accidental leaks, soak up the product using an absorbent material (paper, sawdust, vermiculite, etc.) and dispose of it in a suitable container • Do not use the product for applications not stated in this technical sheet • If in doubt, contact the Litokol S.p.A Technical Help Service. SAFETY INFORMATION Consult the product safety data sheet, available on request. PRODUCT FOR PROFESSIONAL USE Suitable for interior and exterior applications. Enhances the tone and color of the surfaces on which it is applied Resistant to UV rays and weathering Gives a semi-gloss finish High penetrating capacity

Powered by TCPDF (www.tcpdf.org) IDENTIFICATION DATA Appearance Color Odor Customs code Shelf life Clear liquid Colorless Organic solvent 38249097 24 months in original packaging away from sources of heat and direct sunlight. APPLICATION DATA Treatment time Flammable Flash point (ASTM D 56) Specific gravity Application Acceptable application temperatures Consumption 5 - 10 minutes YES +30°C (86°F) open cup 6.9lb/gal (0.84 kg/l) Brush, roller, airless sprayer or fleece From +41°F to +104°F (+5°C to +35°C) 15 - 20 m2/l (16.4 - 21.9yd2/US gal lqd) Data detection at temperature +73.4°F (+23 °C ),...