Catalogs >
LITOKOL >
Litoband

Litoband
1 / 2Pages

Catalog excerpts

Litoband Tape SEALING TAPE FOR WATERPROOFING SYSTEMS FOR INTERIORS AND EXTERIORS. Sealing tape with double layer of polyester fabric and butyl center. For the perfect sealing of corners, special pre-shaped Litoband pieces are available for internal (IC) and external (EC) corners, made using the same material. ADVANTAGES / FEATURES • Suitable for use in severe operating conditions from -22°F to 194°F (from -30°C to +90°C) • Excellent chemical resistance against many aggressive chemicals (see table) • Usable with all types of waterproofing membranes such as Elastocem, Coverflex and Hidroflex Litoband Tape: 10 and 50 m (10.9 and 54.7yd) rolls Litoband Tape and pre-shaped IC and EC corners are used as reinforcing elements together with Elastocem, Coverflex and Hidroflex waterproofing membranes to seal corners in indoor and outdoor areas. Typical applications include: • Waterproofing of wall-to-wall and wall-to-floor corners in areas such as bathrooms, showers, etc. to be waterproofed with Elastocem, Coverflex and Hidroflex. • Waterproofing of expansion joints on balconies and terraces • Waterproofing of wall-to-wall and wall-to-floor corners in reinforced concrete tanks, swimming pools, fountains, etc. Apply the waterproofing membrane to the corners of the environments that need to be waterproofed, in a thickness of at least 1 mm (0.039in); then apply the Litoband SK Tape sealing tape and pre-shaped corners on the fabric side, using a trowel and applying firm pressure to prevent the formation of air bubbles or folds. Make sure that the waterproofing membrane has not formed a film on the surface preventing the tape's adhesion. In the case of joints, the Litoband Tape must be omega-folded so that it can absorb any tension. In this case, the waterproofing membrane must cover the sides of the tape. The Litoband tape must overlap any pre-shaped corners by a few centimeters (inches). After the first coat has dried, a second coat of waterproofing membrane must be applied to completely cover the Litoband elements. • For more details on waterproofing indoor and outdoor wet areas, refer to the instructions in the Litokol User catalog • Protect the waterproofing against rain for the first 24 hours after application • The product must not be visible upon completion. Always apply a ceramic, natural stone or mosaic covering • In warm climates, keep the packaged product in a cool and dry place away from the sun before use • Do not use the product for applications not stated in this technical sheet • If in doubt, contact the Litokol S.p.A Technical Help Service. SAFETY INFORMATION Based on European Regulations (Reg. 1907/2006/EC - REACH) the product is considered an article and therefore does not require safety data sheets. PRODUCT FOR PROFESSIONAL USE

Open the catalog to page 1

Powered by TCPDF (www.tcpdf.org) ITEM SPECIFICATION #For the reinforced waterproofing of wall-to-wall and wall-to-floor corners in indoor and outdoor areas, waterproof sealing tape must be inserted made from a thermoplastic elastomer coupled with an alkali-resistant fabric, such as Litoband Tape by Litokol S.p.A. IDENTIFICATION DATA Composition of material Color Roll length Total width Width of waterproof layer Weight Thickness Tape customs code Shelf life Butyl fabric coupled with two layers of non-woven polyester Gray and white 10 - 50 m (10.9 - 54.7yd) 120 mm (4.7in) 70 mm (2.8in) 30 g/m...

Open the catalog to page 2

Litoband 1 / 2Pages

Catalog excerpts

All LITOKOL catalogs and technical brochures

Litoband
1 / 2Pages