Litoband Koll SINGLE COMPONENT QUICK-SETTING ADHESIVE SEALANT FOR THE BONDING AND SEALING OF LITOBAND WATERPROOFING TAPE. FOR INTERIORS AND EXTERIORS. Adhesive grout for the perfect waterproof installation of Litoband elements in waterproofing systems. ADVANTAGES / FEATURES • Waterproof • Single component • Easy to apply 6.6lb (3 kg) bags (boxes with 6 pcs) - 1,587.3lb (720 kg) standard pallet Litoband Koll used in combination with waterproofing membranes for the sealing of Litoband elements in indoor and outdoor areas. Typical applications include: • Waterproofing of wall-to-wall and wall-to-floor corners in areas such as bathrooms, showers, etc. • Waterproofing of expansion joints on balconies and terraces • Waterproofing of reinforced concrete structures such as swimming pools, fountains, etc., prior to installing ceramics or mosaics • Ideal for the sealing of Litoproof waterproofing sheets WATERPROOFING PLANNING The only way to guarantee the long-lasting performance of ceramic and porcelain tile installations is to properly plan the process. It is therefore advisable to consult the national regulations in force in each country, for example standard UNI 11493 in Italy, which provides all necessary instructions regarding the choice of materials, correct planning, use and installation, so as to ensure all quality, performance and durability standards are safely met. When installing large tiles or low thickness laminated porcelain stoneware slabs, we recommend paragraphs 7.13.8 and 7.13.9 of regulation UNI 11493 be carefully read. Moreover, certain producers of thin slabs provide installation manuals indicating the adhesive classes that need to be used depending on the size, characteristics and intended use of the slabs. Some of the general precautions that need to be followed are listed below as an example. Substrates Before installation, check that substrates are clean, free of loose fragments, properly dried and cured, flat and level, and that mechanical strength requirements based on the intended use have been met. Before application, use a hygrometer to check that the residual humidity in the substrate is maximum 3% CM; on anhydrite screeds maximum 0.5% CM; on anhydrite screeds with heating systems maximum 0.2% CM. (CM = measurement with carbide method hygrometer). Worksite conditions Check the suitability of the temperature, humidity, light conditions etc. at the time of the product’s application. In the case of particularly warm climates (T>95°F) (T>35°C), perform installation in the early hours of the morning. Materials Check that all materials used for tiling (ceramic materials, leveling systems, adhesives, grouts, waterproofing products, etc.) are suitable for the intended use and have been correctly stored. Expansion joints Check that the perimeter, expansion, divider and structural elastic joints have been correctly designed and prepared. Divider joints are normally needed for 20/25 m2 (21.9/27.3yd2) indoor sections, and 9-15m2 (9.84/16.4yd2) outdoor sections. For exteriors, make sure joints are properly waterproofed and sealed. Expansion joints must be waterproofed by inserting the Litoband SK Tape sealing tape, omega-folded inside the joint. Waterproofing systems

To reduce the thickness, allowing the silicone sealant to adhere only to the sides of the tiles, insert the Litogap compressible tubing first, in a diameter suited to the width of the joint. Litokol proposes the neutral cross-linking silicone sealant, Ottoseal S70 for the sealing of elastic joints on terraces, balconies and in swimming pools. To guarantee long-lasting sealing, it is advisable to treat the edges of the joint with Ottoprimer 1216 in the case of balconies and terraces, and Ottoprimer 1218 in the case of tanks and swimming pools. When waterproofing indoor wet areas such as bathrooms...

Powered by TCPDF (www.tcpdf.org) IDENTIFICATION DATA Appearance Color Customs code Shelf life Powder Light gray 38245090 24 months in original packaging in a dry place. Protect against frost. APPLICATION DATA Mix ratio Consistency of mix Mix curing time pH of mix Specific gravity of mix Bonding time Pot life Applicable thicknesses Application Acceptable application temperatures Waiting time for installation of covering Ready for use Serviceability Temperatures How to clean equipment 6.6lb (3 kg) (1 bag) - Water (35%) 1.05 qts. (1.0 l) Creamy mortar 5 minutes 13 1.4 kg/dm3 (3.09lb/in3) 20 minutes...