Litoacril Plus HIGH-PERFORMANCE ADHESIVE IN DISPERSION WITH NO VERTICAL SLIP AND EXTENDED OPEN TIME FOR THE INSTALLATION OF CERAMIC AND PORCELAIN TILES ALSO IN INDOOR WET AREAS. SUITABLE FOR OVERLAYING AND UNDERFLOOR HEATING. Ready-to-use adhesive in dispersion made from synthetic resins in aqueous emulsion, selected aggregates and organic additives. ADVANTAGES / FEATURES 11lb (5 kg) buckets - 1,929lb (875 kg) standard pallet (175 buckets) 2.2lb (1 kg) buckets (boxes with 24 buckets) – 846.5lb (384 kg) standard pallet (384 buckets) Intended uses Interiors Floors and walls Underfloor heating Residential, public, commercial building Ceilings Indoor wet areas (bathrooms, shower enclosures) Overlaying For example, it can also be used to install suitable materials in the following areas: Interior floors in residential and public/commercial settings (pedestrian areas) Substrates Longest allowable tile side (in) (cm) Cement or Litocem/Litocem Pronto-based non-heating screeds up to 45 Cement or Litocem/Litocem Pronto-based heating screeds up to 30 Sulfate-based (anhydrite) non-heating screeds up to 45 Sulfate-based (anhydrite) heating screeds up to 30 Wood panels up to 45 Interior walls in residential, public/commercial and industrial settings Substrates Longest allowable tile side (in) (cm) Lime/cement plaster up to 60 Gypsum-based plaster up to 60 Allows the installation of ceramic, porcelain and mosaic wall coverings without the need for plastic spacers Suitable for installation on heating screeds Suitable for overlaying on existing flooring Bonding on all types of ceramic, porcelain and mosaic tiles, in interiors on floors and walls Ideal for application on gypsum-based plasters with no need to apply a primer beforehand The special additives give the product a very fluid texture and facilitate application using a notched trowel No restrictions for transport over road, sea, air and rail Materials Ceramic and porcelain tiles Porcelain stoneware Ceramic mosaics Terracotta - Clinker Marble – Granite – Stone Natural stones Insulating panels Polystyrene panels Soundproof panels Elements in cement Glass wool Rockwool Cork Double fired Single fired Suitable substrates Cement screeds Self-levelers Skim coats Existing tiles Gypsum and anhydrite Underfloor heating systems Concrete Gypsum Fiber cement slabs Wood panels, type CTBH and CTBX Aerated concrete Plasters Insulating panels Lightweight panels

Cast-in-place concrete (2) Pre-cast concrete Fiber cement and cement panels Gypsum slabs Wood panels (1) After treatment with Primer C or Primer X94. Maximum humidity = 0.5%. (2) Curing time: minimum 6 months. (3) After cleaning and degreasing with Litoscrub EVO. (4) After treatment with the adhesion promoter Prepara Fondo EVO. (5) After treatment with Primer C or Primer X94 for non-waterproof gypsum. (6) After treatment with Primer X94. INSTALLATION PLANNING The only way to guarantee the long-lasting performance of ceramic and porcelain tile installations is to properly plan the process. It...

The trowel notch size will depend on the size of the tiles. In any case, a back coverage of 65-70% of tiles must be possible. The tiles must be laid on the adhesive when fresh, firmly pressed to ensure good contact. The product's open time in normal temperature and humidity conditions is approximately 30 minutes. Very warm or windy climates, or particularly absorbent substrates may drastically reduce it to a few minutes. It is therefore recommended to regularly check that the adhesive has not skinned over. The tiles must be installed with joint widths suitable for their size. Take account of...

Powered by TCPDF (www.tcpdf.org) ITEM SPECIFICATION #Ceramic and porcelain floor and wall coverings will be installed using a high-performance adhesive in dispersion with no vertical slip and extended open time in class D2 TE according to EN 12004, such as Litoacril Plus by Litokol S.p.A. IDENTIFICATION DATA Appearance Color Customs code Shelf life Thick paste White 35069190 24 months in original packaging in a dry place. Protect against frost. APPLICATION DATA Mix ratio Consistency of mix pH of mix Specific gravity of mix Bonding time Applicable thicknesses Application Acceptable application...