Litoacril LA315 READY-TO-USE ADHESIVE IN DISPERSION WITH NO VERTICAL SLIP AND LONG OPEN TIME FOR THE INSTALLATION OF CERAMIC AND PORCELAIN TILES ON INTERIOR WALLS AND FLOORS. Ready-to-use adhesive in dispersion made from synthetic resins in aqueous emulsion, selected aggregates and organic additives. ADVANTAGES / FEATURES 11lb (5 kg) buckets - 1,929lb (875 kg) standard pallet (175 buckets) 22lb (10 kg) buckets - 1,587.3lb (720 kg) standard pallet (72 buckets) 55.1 lb (25 kg) buckets - 1,058.2lb (750 kg) standard pallet (30 buckets) Intended uses Interiors Floors and walls Ceilings Residential, public, commercial building The substrates must be clean, solid, compact, crack-free, properly cured and without rising damp. • In the case of anhydrite screeds, check for the presence of a suitable vapor barrier in order to prevent rising damp. Use a carbide method hygrometer to check that the residual humidity is less than 0.5%. The surface must be sanded • Any cracks must be repaired with Multifondo EVO, sprinkling the fresh surface with sand or dried quartz with granulometry 1/50" - 1/24 in (0.4-1 mm) In any case, the respective technical data sheets must be consulted for correct use of the indicated products. Allows the installation of ceramic, porcelain and mosaic wall coverings without the need for plastic spacers Bonding on all types of ceramic, porcelain and mosaic tiles, in interiors on floors and walls Ideal for application on gypsum-based plasters with no need to apply a primer beforehand No restrictions for transport over road, sea, air and rail Materials Ceramic and porcelain tiles Ceramic mosaics Single fired Double fired Terracotta - Clinker Marble – Granite – Stone Natural stones Insulating panels Polystyrene panels Soundproof panels Glass wool Rockwool Cork Porcelain stoneware Suitable substrates Cement screeds Self-levelers Skim coats Gypsum and anhydrite Gypsum Plasters Insulating panels Lightweight panels Fiber cement slabs Aerated concrete

For example, it can also be used to install suitable materials in the following areas: Interior floors in residential and public/commercial settings (pedestrian areas) Substrates Longest allowable tile side (in) (cm) Cement or Litocem/Litocem Pronto-based non-heating screeds up to 30 Cement or Litocem/Litocem Pronto-based heating screeds up to 30 Sulfate-based (anhydrite) non-heating screeds up to 30 Sulfate-based (anhydrite) heating screeds up to 30 Interior walls in residential, public/commercial and industrial settings Substrates Longest allowable tile side (in) (cm) Lime/cement plaster up...

Ready-to-use product without the need for any preparation. In any case, once the container has been opened, we recommend mixing the product briefly, even manually, with a masonry trowel or steel trowel. Spread the mix onto the substrate using the smooth part of the trowel to create a layer approximately 1 mm thick (0.039in). Immediately afterwards, apply the product using the notched part of the trowel. The trowel notch size will depend on the size of the tiles. In any case, a back coverage of 65-70% of tiles must be possible. The tiles must be laid on the adhesive when fresh, firmly pressed...

Powered by TCPDF (www.tcpdf.org) SAFETY INFORMATION Consult the product safety data sheet, available on request. PRODUCT FOR PROFESSIONAL USE ITEM SPECIFICATION #Ceramic and porcelain floor and wall coverings will be installed using an adhesive in dispersion with no vertical slip and extended open time in class D1TE according to EN 12004, such as Litoacril LA315 by Litokol S.p.A. IDENTIFICATION DATA Appearance Color Customs code Shelf life Thick paste Gray 35069190 24 months in original packaging in a dry place. Protect against frost. APPLICATION DATA Mix ratio Consistency of mix pH of mix Specific...