Litoacril Fix READY-TO-USE ADHESIVE IN DISPERSION WITH LONG OPEN TIME FOR THE INSTALLATION OF CERAMIC AND PORCELAIN TILES. FOR INTERIORS. Ready-to-use adhesive in dispersion made from synthetic resins in aqueous emulsion, selected aggregates and organic additives. ADVANTAGES / FEATURES • Bonding on all types of ceramic, porcelain and mosaic tiles, in interiors on floors and walls • Ideal for application on gypsum-based plasters with no need to apply a primer beforehand • No restrictions for transport over road, sea, air and rail 11lb (5 kg) buckets - 1,929lb (875 kg) standard pallet (175 buckets) Intended uses Interiors Floors and walls Ceilings Residential, public, commercial building For example, it can also be used to install suitable materials in the following areas: Interior floors in residential and public/commercial settings (pedestrian areas) Substrates Longest allowable tile side (in) (cm) Cement or Litocem/Litocem Pronto-based non-heating screeds up to 30 Cement or Litocem/Litocem Pronto-based heating screeds up to 30 Sulfate-based (anhydrite) non-heating screeds up to 30 Sulfate-based (anhydrite) heating screeds up to 30 Interior walls in residential, public/commercial and industrial settings Substrates Longest allowable tile side (in) (cm) Lime/cement plaster up to 30 Gypsum-based plaster up to 30 Cast-in-place concrete (2) up to 30 Pre-cast concrete up to 30 Fiber cement and cement panels up to 30 Gypsum slabs up to 30 (1) After treatment with Primer C or Primer X94. Maximum humidity = 0.5%. (2) Curing time: minimum 6 months. (3) After cleaning and degreasing with Litoscrub EVO. Materials Ceramic and porcelain tiles Single fired Ceramic mosaics Terracotta - Clinker Double fired Soundproof panels Insulating panels Polystyrene panels Glass wool Rockwool Cork Porcelain stoneware Suitable substrates Cement screeds Self-levelers Skim coats Gypsum and anhydrite Gypsum Aerated concrete Plasters Insulating panels Lightweight panels

(4) After treatment with the adhesion promoter Prepara Fondo EVO. (5) After treatment with Primer C or Primer X94 for non-waterproof gypsum. (6) After treatment with Primer X94. INSTALLATION PLANNING The only way to guarantee the long-lasting performance of ceramic and porcelain tile installations is to properly plan the process. It is therefore advisable to consult the national regulations in force in each country, for example standard UNI 11493 in Italy, which provides all necessary instructions regarding the choice of materials, correct planning, use and installation, so as to ensure all quality,...

Marble, natural and recomposed stones Materials subject to deformation or stains due to water absorption require a quick-setting (C2F) or reactive (R2) adhesive. Marble and natural stones, even if similar in nature, may have different characteristics. In case of doubt, contact the Litokol S.p.A. Technical Help Service for detailed information or to perform a laboratory test. Natural stone slabs with reinforced backing (resin, mesh, etc.) or specific treatments (for example anti-rising damp, etc.), unless otherwise prescribed by the manufacturer must be tested for compatibility with the adhesive....

Powered by TCPDF (www.tcpdf.org) ITEM SPECIFICATION #Ceramic and porcelain floor and wall coverings will be installed using an adhesive in dispersion with extended open time in class D1 E according to EN 12004, such as Litoacril Fix by Litokol S.p.A. IDENTIFICATION DATA Appearance Color Customs code Shelf life Thick paste White 35069190 24 months in original packaging in a dry place. Protect against frost. APPLICATION DATA Mix ratio Consistency of mix pH of mix Specific gravity of mix Bonding time Applicable thicknesses Application Acceptable application temperatures Waiting time for grouting...