Hyperflex K100 HIGH-PERFORMANCE, HIGHLY DEFORMABLE CEMENTITIOUS ADHESIVE WITH NO VERTICAL SLIP AND LONG OPEN TIME FOR THE INSTALLATION OF CERAMIC AND PORCELAIN TILES, PORCELAIN STONEWARE, LARGE SLABS, MOSAICS AND NATURAL STONES ON INTERIOR AND EXTERIOR WALLS AND FLOORS. ZHERORISK TECHNOLOGY OFFERS VERY LOW VOLATILE ORGANIC COMPOUND EMISSION RATE. ADVANTAGES / FEATURES Ideal for the installation of large slabs even with fiber-reinforced backing, including overlaying and wall coverings Versatile product. Can also be used on underfloor heating and over existing ceramic and porcelain tiles Allows the installation of ceramic, porcelain and mosaic wall coverings without the need for plastic spacers Suitable for installation on heating screeds Suitable for overlaying on existing flooring Suitable for interior and exterior floor and wall applications, even in severe operating conditions Single component highly deformable product (class S2 according to EN 12002) Maintains excellent pot life over time, without any bothersome thickening The special additives give the product a very fluid texture and facilitate application using a notched trowel The Dust Reduction function applied to the product allows a drastic reduction in the amount of dust produced during mixing with water, thus improving the working conditions of installers The super white color enhances the shades of vitreous mosaics Its low specific gravity allows a 15% higher yield with respect to traditional cementitious adhesives in class C2 Product with high deformation and excellent water-resistance properties Product exhibiths Very low volatile organic compound (VOC). Complies with the most stringent Global Air Quality Regulations. 44lb (20 kg) bags - 2,645.5lb (1,200 kg) standard pallet of 60 bags Intended uses Interiors and exteriors Floors and walls Underfloor heating Facades Overlaying Terraces and balconies Residential, public, commercial building Ceilings Tanks, swimming pools, fountains SPAS and Saunas Indoor wet areas (bathrooms, shower enclosures) Industrial flooring Skim coat Materials Ceramic and porcelain tiles Thin laminated stoneware slabs Recomposed stone made with resin or cement Terracotta - Clinker Marble – Granite – Stone Natural stones Slabs 126x63 in (320x160 cm) Large-Format tiles and panels Porcelain stoneware Single fired Double fired Slabs with resin backing Cementitious adhesives Suitable substrates Cement screeds Self-levelers Skim coats Existing tiles Waterproofing systems Underfloor heating systems Concrete Gypsum Fiber cement slabs Gypsum and anhydrite Aerated concrete Plasters Insulating panels Lightweight panels Decouplin

For example, it can also be used to install suitable materials in the following areas: Interior floors in residential and public/commercial settings (pedestrian areas) Substrates Longest allowable tile side (in) (cm) Cement or Litocem/Litocem Pronto-based non-heating screeds any Cement or Litocem/Litocem Pronto-based heating screeds any Sulfate-based (anhydrite) non-heating screeds (1) any Sulfate-based (anhydrite) heating screeds (1) any Cast-in-place concrete (2) any Pre-cast concrete up to 120 Pre-existing tiled, mosaic, stone, agglomerate substrates (3) any Pre-existing substrates with organic...

INSTALLATION PLANNING The only way to guarantee the long-lasting performance of ceramic and porcelain tile installations is to properly plan the process. It is therefore advisable to consult the national regulations in force in each country, for example standard UNI 11493 in Italy, which provides all necessary instructions regarding the choice of materials, correct planning, use and installation, so as to ensure all quality, performance and durability standards are safely met. When installing large tiles or low thickness laminated porcelain stoneware slabs, we recommend paragraphs 7.13.8 and...

Pour the right quantity of water, depending on the application, into a clean container and slowly add the powder, stirring with an electric drill with mixing paddle until a consistent mix is obtained without lumps. Let the mix rest for about 5 minutes and then briefly mix again for a few seconds. The pot life is about 8 hours at a temperature of 73.4°F (+23°C). Do not use quantities of mixing water greater than those indicated to avoid product shrinkage during curing and the lowering of the final mechanical properties. Do not add more water to the mix once setting has begun. Spread the mix onto...

Joints can be grouted after approximately 6-8 hours in the case of wall tiles and after 24 hours in the case of floor tiles. For grouting, it is possible to use the cementitious grouts Stylegrout 0-8, Stylegrout 3-20, Stylegrout Tech or the ready-to-use polymer mortar FillGood EVO, or, for grouting with special mechanical and chemical resistance, the twocomponent epoxy grouts Starlike® EVO or EpoxyÉlite EVO. Spread the product at temperatures between 40°F and 95°F Respect the mix ratio The pot life is about 8 hours at a temperature of 73.4°F (+23°C) The product can be used to install separation...

Powered by TCPDF (www.tcpdf.org) Standard Initial tensile adhesion strength after 28 days Tensile adhesion strength after immersion in water Tensile adhesion strength after heat action Tensile adhesion strength after freeze/thaw cycles Open time Slip Transverse deformation Resistance to alkalis Resistance to solvents Resistance to acids Standard Open time Tempo aperto allungato Slip Adesione a taglio piastrelle smaltate Adesione a trazione iniziale dopo 7 giorni Adesione a trazione dopo immersione in acqua (7 giorni) Tensile adhesion strength after heat action Adesione a taglio mosaico in porcellanato...