HydroProof Anti-Fracture Technical Specifications Pre-formed waterproofing and vapour barrier membrane in rolls for under-tile waterproofing in swimming pools, terraces, damp rooms and showers. Product description Pre-formed waterproofing and vapour barrier membrane in rolls for under-tile waterproofing in swimming pools, terraces, damp rooms and showers. The HydroProof Anti-Fracture multi-layer technology consists of an elastic, waterproof polymer film made of modified polyethylene, coated on both sides with a non-woven fabric made of modified polypropylene with a high specific surface area. The inclusion of this specific non-woven fabric ensures high levels of adhesion to substrates and during the installation of ceramic tile and natural stone cladding using the high-performance gels based on Litokol technology. HydroProof Anti-Fracture is quick and easy to apply and provides immediate waterproofing; it guarantees maximum waterproofing reliability thanks to its consistent thickness and low vapour diffusivity (vapour barrier). It retains its very high elasticity and waterproofing properties even at very low temperatures (-30°C). For waterproof sealing of surface perimeters and the joints between membranes, use HydroBand Anti-Fracture tape and HydroCorner corners bonded with HydroBand Gel. Complies with EN 13956 EC1 Plus Gev Emicode A+ Indoor air emissions Technical Specifications

Self-levelling compounds Levelling Compounds Plaster and skim coats Existing tiles Radiant heating systems Concrete and reinforced concrete Plasterboard Plaster and anhydrite Fibre-cement sheets Lightweight panels Uses Interior - exterior Floors - walls Overlay Swimming pools and fountains Terraces and balconies SPA and Hammam Indoor wet areas (bathrooms, showers) Facades Industrial flooring Residential, public and commercial construction Limitations The ambient and surface temperature must be above 5°C at the time of installation and for 72 hours after application Apply the coating to the membrane...

Effective waterproof width Shelf life Customs heading Unlimited when protected from direct sunlight 56021090 Longitudinal breaking load Longitudinal breaking load Lateral breaking load Longitudinal elongation at break Transverse elongation at break 130% Longitudinal tear strength 65 N Lateral tear resistance 140 N Resistance to water pressure > 1.5 bar Water vapour resistance ‘Sd' > 50 m Reaction to fire Class B2 (+ = resistant / 0 = weakened / - = not resistant) In-house method In-house method In-house method In-house method In-house method In-house method In-house method In-house method In-house...

essential to consult the relevant technical data sheets to ensure the correct use of the products indicated. Laying the sheets Cut the HydroProof Anti-Fracture membrane to size. For bonding, use highperformance gels based on Litokol technology; the choice of product depends on the type of substrate and the specific installation requirements. For guidance on selecting the correct gel to use and its application, please refer to the product data sheets. Apply the gel to the substrate using a suitable notched trowel (generally a 3.5 mm trowel is recommended); lay the membrane within the adhesive’s...

Sealing of penetrations At drains and pipes, cut the Litoproof membrane to the required diameter. Where there are pipe penetrations, drains, spotlights, etc., fit the special HydroCollar and HydroDrain SA sealing components. For sealing pipework, install HydroCollar fittings of the appropriate diameter. Attach the seals to the HydroProof Anti-Fracture membrane using the HydroPixel MS polymerbased hybrid adhesive, applied with a 2 mm notched trowel. After applying the hybrid adhesive, lightly spray water onto the surface to promote rapid curing and apply the seals, pressing them down with a smooth...

Powered by TCPDF (www.tcpdf.org) Safety Information Safety Data Sheet, available at www.litokol.com PRODUCT FOR PROFESSIONAL USE Legal notices The information and specifications set out in this technical data sheet are based on our best experience. However, as we are unable to directly influence site conditions or the execution of the works, these are general guidelines which do not in any way bind our Company. We therefore recommend carrying out a preliminary test to verify the product’s suitability for the intended use; in any case, anyone intending to use it is required to determine whether...