HydroPixel Technical Specifications Super Sigillante Pro multi-purpose adhesive for bonding, joining and sealing any material to any substrate, even damp ones Product description Super Sigillante Pro multi-purpose elastic adhesive for bonding, joining and sealing any material to any substrate, even damp ones: it achieves high adhesion performance whilst maintaining its elastic deformation capacity. Cross-links using atmospheric moisture to form high-performance, permanently flexible elastic seals. Free from solvents and isocyanates. Suitable for indoor and outdoor applications on floors and walls, even under severe operating conditions Offers excellent adhesion without a primer on all typical industrial and construction materials Bonds when wet and when submerged, and can be overpainted with most water-based and solvent-based paints (preliminary tests are recommended in all cases) F EXT-INT CC certified in accordance with EN 15651-1 XS3 CC EN certified in accordance with 15651-3 PW EXT-INT CC certified in accordance with EN 15651-4 Free from solvents and isocyanates. Does not contain cement or acetic polymers Not hazardous to applicators according to the CLP Regulation Continuous system free from rubber, plastic and PVC (rolls, membranes and tapes) Ready to use, reusable, minimises waste and material wastage Very low emissions of volatile organic compounds (VOCs) Technical Specifications

F EXT-INT CC EN 15651-1 XS3 CC EN 15651-3 PW EXT-INT CC EN 15651-4 EC1 PLUS Gev Emicode A+ Indoor air emissions ISEGA for contact with food Screeds Self-levelling compounds Levelling Compounds Plaster and skim coats Existing tiles Radiant heating systems Concrete and reinforced concrete Plasterboard Plaster and anhydrite Fibre-cement sheets Wood and engineered wood panels Metals Plastics and PVC Fibreglass Lightweight panels Existing cement-polymer waterproofing products Ceramic tiles Resin- or cement-based composites Terracotta – Klinker Marble – Granite – Stone materials Ceramic and glass mosaics...

Areas subject to heavy footfall and high stress Limitations Do not apply to uneven or excessively rough substrates. Apply a skim coat with HydroLevel® Do not use where negative hydraulic pressures are present Do not apply the product to bituminous membranes, rubber substrates or substrates treated with resins Refer to national standards, such as UNI 11493 Customs classification Shelf life Coloured thick paste White 12 months in the original packaging, away from heat sources and direct light. Keep away from frost. Full curing Shore A hardness 100% elastic modulus Tensile strength Elongation at...

Powered by TCPDF (www.tcpdf.org) Do not allow the product to cure in the presence of silicone sealants. Avoid contact with solvents during curing. As the product is moisture-curing, ensure sufficient exposure to air. Bonded elements may require additional support during the curing period. The extruded product must be compressed and worked deep into the surface to promote optimal adhesion and ensure watertightness; we recommend using a metal or plastic trowel moistened with soapy water. Do not use for applications not listed on this technical data sheet For further information, please contact...