*myarchiexpo

Catalogs
LITOKOL
HydroPad® Indoor

HydroPad® Indoor

Product catalog summary

Product Identification: HydroPad Indoor

Intended Use: The product is a liquid-applied water impermeable solution designed for external installations and swimming pools beneath ceramic tiling, bonded with a C2 adhesive as per EN 12004.

Manufacturer: LITOKOL LAB S.p.A., located in Rubiera, Italy.

Assessment and Verification of Constancy of Performance (AVCP) Systems: System 4 for general use and System 3 specifically for water impermeability.

Harmonised Standard: The product complies with EN 14891:2012+AC:2012, with testing conducted by MCP Modena Centro Prove s.r.l., notified body number 1599.

Declared Performances:

Initial tensile adhesion strength: ≥ 0.5 N/mm²
Tensile adhesion strength after water immersion, heat ageing, contact with lime water, freeze-thaw cycles, and chlorine water: ≥ 0.5 N/mm²
Waterproofing: No penetration
Crack bridging ability under standard conditions (+23°C): ≥ 0.75 mm
Crack-bridging capability at very low temperatures (-5°C): ≥ 0.75 mm
Release of dangerous substances: Refer to Safety Data Sheet (SDS)

Conformity Statement: The product's performance is in conformity with the declared specifications, as per Regulation (EU) No 305/2011.

Authorized Signatory: Gian Luca Sghedoni, CEO of Litokol Lab S.p.A.

Revision Information: Revision number 0, dated 24/03/26.

Catalog excerpts

Powered by TCPDF (www.tcpdf.org) HydroPad® Indoor Declaration of Performance N° CPR- IT649 Regulation (EU) n. 305/2011 - Regulation (EU) n. 574/2014 1. Unique identification code of the product-type: HydroPad Indoor 2. Intended use/es: Liquid-applied water impermeable product (DM 01P) all external installations and swimming pools beneath ceramic tiling (bonded with a C2 adhesive in accordance with EN 12004) 3. Manufacturer: LITOKOL LAB S.p.A. – Via G. Falcone 13/1 – 42048 Rubiera (RE) – Italy – www.litokol.com 4. System/s of AVCP: System 4 System 3 for water impermeability 5. Harmonised standard: EN 14891:2012+AC:2012 Notified body/ies: MCP Modena Centro Prove s.r.l. – NB 1599 6. Declared performance/s: Essential characteristics Initial tensile adhesion strength Tensile adhesion strength after water immersion Tensile adhesion strength after heat ageing Tensile adhesion strength after contact with lime water Tensile adhesion strength after freeze-thaw cycles Tensile adhesion strength after contact with chlorine water Crack bridging ability under standard conditions (+23°C) Crack-bridging capability at very low temperatures (-5°C) Release of dangerous substances The performance of the product identified above is in conformity with the set of declared performance/s. This declaration of performance is issued, in accordance with Regulation (EU) No 305/2011, under the sole responsibility of the manufacturer identified above. Signed for and on behalf of the manufacturer by: Gian Luca Sghedoni – CEO Litokol Lab S.p.A.

Open the catalog to page 1

HydroPad® Indoor

HydroPad® Indoor

Catalog excerpts

All LITOKOL catalogs and technical brochures