*myarchiexpo

Catalogs
LITOKOL
HydroMesh Anti-Fracture

HydroMesh Anti-Fracture

Product catalog summary

Product Description: The HydroMesh Anti-Fracture is an alkali-resistant fibreglass mesh designed for use with HydroPad gel membranes. It features a 10x10 mm mesh size to ensure complete substrate coverage, enhancing adhesion between waterproofing gel layers and ensuring a minimum thickness of 2 mm for watertight performance.

Product Specifications: The mesh is made of alkali-resistant fibreglass, is white in color, and comes in rolls of 50 m length and 1 m width, weighing 148 g/m². It has an unlimited shelf life if stored in original packaging away from sunlight.

Substrates: Suitable for various substrates including screeds, self-levelling compounds, plaster, existing tiles, radiant heating systems, concrete, plasterboard, fibre-cement sheets, and lightweight panels.

Uses: Applicable for both interior and exterior surfaces, including floors, walls, swimming pools, terraces, SPAs, wet areas, facades, and industrial flooring.

Limitations: Not suitable for structural reinforcement. Users should refer to national standards like UNI 11493.

Preparation of Substrates: Substrates must be cured, free from moisture, and mechanically sound. Specific treatments are recommended for dusty or smooth surfaces, and moisture content should be checked for certain screeds.

Application: The mesh should be cut to size and embedded in the first coat of HydroPad waterproofing membrane while still wet. A second coat should be applied to fully conceal the mesh weave.

Warnings: Do not move the mesh before the membrane sets. Use only for applications listed in the technical data sheet.

Safety Information: Classified as an article under European regulations, no safety data sheet is required.

Legal Notices: The guidelines provided are based on experience but do not bind the company. Users should verify product suitability for their specific use.

Catalog excerpts

HydroMesh Anti-Fracture Technical Specifications Alkali-resistant fibreglass anti-crack mesh to ensure full coverage of substrates in HydroPad gel membrane applications Product description Alkali-resistant fibreglass anti-crack mesh with 10x10 mm mesh size to ensure complete coverage of substrates in HydroPad gel membrane applications The use of HydroMesh Anti-Fracture, embedded in the first coat of waterproofing gel and covered with the second coat, ensures complete coverage of the substrates with a minimum thickness of 2 mm of waterproofing gel, thereby guaranteeing the final watertight performance. The specific alkali-resistant primer ensures better adhesion to HydroPad gels. The larger mesh size enhances adhesion between the first and second coats of waterproofing gel during curing and reduces physical discontinuities within the thickness of the waterproofing layer. Product specifications Material composition Colour Roll length Roll width Weight Shelf life Customs heading Substrates 1 - HydroMesh Anti-Fracture Alkali-resistant fibreglass mesh White 50 m 1m 148 g/m2 Unlimited in the original packaging, protected from direct sunlight XXXXXXXX TO BE DETERMINED Technical Specifications

Open the catalog to page 1

Self-levelling compounds Levelling Compounds Plaster and skim coats Existing tiles Radiant heating systems Concrete and reinforced concrete Plasterboard Plaster and anhydrite Fibre-cement sheets Lightweight panels Uses Interior - exterior Floors - walls Overlay Swimming pools and fountains Terraces and balconies SPA and Hammam Indoor wet areas (bathrooms, showers) Facades Industrial flooring Residential, public and commercial construction Limitations Do not use for structural reinforcement Refer to national standards, such as UNI 11493 Preparation of In accordance with standard UNI 11493-1, substrates...

Open the catalog to page 2

being embedded. In the case of movement joints, waterproofing must be carried out using HydroBand Anti-Fracture; the mesh may be either interrupted or left continuous near the joints waterproofed with the tape. It is essential to apply a second coat of waterproofing gel over the mesh until its weave is completely concealed: this ensures total waterproof coverage of the substrate. Refer to the technical data sheets for the products listed before use. Do not move the mesh before the HydroPad membrane has set Do not use for applications not listed on this technical data sheet For further information,...

Open the catalog to page 3

Powered by TCPDF (www.tcpdf.org) Product details No. 643 Revision No. 0 Date: 04 25 Litokol Lab Spa Via G. Falcone 13/1 42048 Rubiera RE Italy Tel. +39 0522 622811 [email protected] www.litokol.com Technical Specifications

Open the catalog to page 4

HydroMesh Anti-Fracture

HydroMesh Anti-Fracture

Catalog excerpts

All LITOKOL catalogs and technical brochures