A multi-purpose, quartz-reinforced structural levelling compound, with anti-shrinkage properties and controlled expansion to prevent cracking, a fast-setting, self-polymerising formula with an extremely low cement content, for levelling in swimming pools, terraces and showers prior to the installation of porcelain stoneware and natural stone Product description A multi-purpose, quartz-reinforced structural levelling compound, nonshrinking and with controlled expansion to prevent cracking, fast-setting, selfcuring and with an extremely low cement content, for smoothing, levelling and creating gradients, even in damp, constantly wet and underwater areas such as swimming pools, terraces and showers, prior to the installation of porcelain stoneware and natural stone coverings HydroLevel 1-30 levels and fills thicknesses from 1 to 30 mm in new or existing substrates and produces a smooth finish. It is suitable for levelling screeds for both electric and hot-water underfloor heating systems EC1 Plus Gev Emicode A+ Indoor air emissions EPD Environmental Product Declaration LCA results for Global Warming Potential - Greenhouse Gases (GWP-GHG) Impact category Unit A1-A3 C1 C2 C3 C4 D Climate change GWP-GHG kg CO0 eq 2.72 x 4.38 1.08 x 0 4.92 -5.53 1 - HydroLevel® 1-30 Technical Specifications

Self-levelling compounds Levelling Compounds Plaster and skim coats Existing tiles Radiant heating systems Concrete and reinforced concrete Plasterboard Plaster and anhydrite Fibre-cement sheets Uses Interior - exterior Floors - walls Overlay Swimming pools and fountains Terraces and balconies SPA and Hammam Indoor wet areas (bathrooms, showers) Facades Industrial flooring Residential, public and commercial construction Limitations Do not use too much water when mixing: excessive amounts of water will prolong curing times and may lead to the formation of cracks and delamination, as well as powdery...

Application Permissible application temperatures Ready for foot traffic Drying time before laying ceramic tiles and natural stone Waiting time before laying resilient flooring and parquet Operating temperature Cleaning of equipment Trowel From +5°C to +35°C 3 hours 3 hours 12 hours From -30°C to +90°C With water when the product is fresh. Mechanically once the product has hardened. 1.7 kg/m2 per mm of thickness Technical Specifications Compliance Flexural strength after 28 days Compressive strength after 28 days Bond to concrete after 28 days In accordance with standard UNI 11493-1, substrates...

before application. The mixture is poured directly onto the substrate. When applying the product, use a smooth steel trowel, pressing firmly to expel any air trapped during mixing. If thick layers are required, apply several successive coats following the instructions above, up to a maximum total thickness of 30 mm. A levelling coat may be applied approximately 3 hours after the first coat has been applied. For a smoother surface finish, use a sponge trowel once the product has started to set and is sufficiently hardened. The subsequent laying of ceramic tiles and natural stone can be carried...

Powered by TCPDF (www.tcpdf.org) Safety Information For the safe use of our products, please refer to the latest version of the Safety Data Sheet, available at www.litokol.com PRODUCT FOR PROFESSIONAL USE Legal notices The information and specifications set out in this technical data sheet are based on our best experience. However, as we are unable to directly influence site conditions or the execution of the works, these are general guidelines which do not in any way bind our Company. We therefore recommend carrying out a preliminary test to verify the product’s suitability for the intended...