*myarchiexpo

Catalogs
LITOKOL
HydroDrain SA

HydroDrain SA

Product catalog summary

Product Description: HydroDrain SA is a special self-adhesive butyl rubber sealant designed for watertight sealing of drains in waterproofing applications such as terraces, damp rooms, and showers. It is easy to apply on cementitious substrates and ceramic tiles, with no waiting time required for adhesive setting. The product is compatible with bituminous and tar-based membranes.

Composition and Features: The sealant consists of a multi-layer tape with a waterproof, elastic polymer film made from modified polyethylene, and a modified polypropylene non-woven fabric covering. It is grey in color, packaged in boxes of 25 pieces, and has dimensions of 370 × 370 mm with a thickness of 1.30 mm ± 0.1 mm.

Certifications: The product is certified with EC1 Plus Gev Emicode and A+ for indoor air emissions.

Substrates: Suitable substrates include screeds, self-levelling compounds, plaster, existing tiles, radiant heating systems, concrete, plasterboard, fibre-cement sheets, lightweight panels, and bituminous membranes.

Uses: HydroDrain SA is applicable for both interior and exterior surfaces, including floors, walls, terraces, balconies, SPA, Hammam, indoor wet areas, facades, and industrial flooring.

Limitations: The product should not be left exposed, used for waterproofing structural joints, or in swimming pools, baths, or fountains. Substrates must be free from dust and condensation before application.

Technical Specifications: The product has a peel test result of > 10 N / 20 mm on a neutral PVC substrate and operates within temperatures from -30°C to +90°C.

Application Instructions: Substrates must be adequately cured and free from moisture, grease, and loose particles. HydroDrain SA should be applied directly to the substrate, covering the floor drain, with firm pressure to avoid air bubbles. It is essential to consult technical data sheets for correct usage.

Warnings: Do not walk on or move the newly laid seal. The product is for professional use only and does not require a safety data sheet under current European regulations.

Catalog excerpts

HydroDrain SA Technical Specifications Special self-adhesive butyl rubber sealant for the watertight sealing of drains in the waterproofing of terraces, damp rooms and showers. Product description Special self-adhesive butyl rubber sealant for the watertight sealing of drains in the waterproofing of terraces, damp rooms and showers. It is easy to apply to cementitious substrates and ceramic tiles: the protective liner with overlapping flaps on the reverse side allows for easy removal and positioning; smooth out the self-adhesive tape. No waiting time is required for the adhesive to set, and it is suitable for use on bituminous membranes and tar-based membranes. The HydroBand SA Anti-Fracture multi-layer technology consists of an elastic, waterproof polymer film made of age-resistant modified butyl rubber, coated on the upper surface with an alkali-resistant non-woven fabric made of modified polypropylene with a high specific surface area to ensure excellent adhesion of the membranes that will cover the tape during the waterproofing process. EC1 Plus Gev Emicode A+ Indoor air emissions Screeds Self-levelling compounds Levelling Compounds Plaster and skim coats Existing tiles Technical Specifications

Open the catalog to page 1

Radiant heating systems Concrete and reinforced concrete Plasterboard Plaster and anhydrite Fibre-cement sheets Lightweight panels Bituminous membranes and tar-based membranes Interior – exterior Floors – walls Overlay Terraces and balconies SPA and Hammam Indoor wet areas (bathrooms, showers) Facades Industrial flooring Residential, public and commercial construction Do not leave the product exposed Do not use for waterproofing structural joints Do not use in swimming pools, baths or fountains. Thoroughly remove dust and condensation from the substrates before application. Refer to national...

Open the catalog to page 2

In accordance with standard UNI 11493-1, substrates and coatings based on concrete, cement and plaster must be adequately cured and must not show signs of excessive moisture emission, condensation, efflorescence or hydrostatic problems. Substrates must be mechanically sound and free from loose particles, grease, oil, paint, wax and rising damp. Cement-based plasters must be allowed to cure for at least one week per centimetre of thickness. Cement-based screeds must have a total curing time of at least 28 days or be laid using the innovative X-Floor® and X-Floor® Pro anti-crack screeds. Surfaces...

Open the catalog to page 3

Powered by TCPDF (www.tcpdf.org) Product details No. 640 Revision No. 0 Date: 04 25 Litokol Lab Spa Via G. Falcone 13/1 42048 Rubiera RE Italy Tel. +39 0522 622811 [email protected] www.litokol.com Technical Specifications

Open the catalog to page 4

HydroDrain SA

HydroDrain SA

Catalog excerpts

All LITOKOL catalogs and technical brochures