HydroCorner SA Internal - External Technical Specifications Pre-formed, crack-resistant special pieces made from self-adhesive elastic butyl rubber for waterproofing corners on terraces, in damp rooms and showers. Product description Pre-formed anti-crack special pieces made from continuous, self-adhesive, elastic butyl rubber for waterproofing corners, edges, wall-to-floor and wallto-wall junctions, changes in slope and perimeter joints on terraces, damp rooms and showers. They are easy to apply to cementitious substrates and ceramic tiles: the protective liner with overlapping flaps on the back allows for easy removal and positioning, and helps to smooth out the self-adhesive tape. No waiting time is required for the adhesive to set, and it is suitable for use on bituminous membranes and tar-based membranes. The HydroBand SA Anti-Fracture multi-layer technology consists of an elastic, waterproof polymer film made of age-resistant modified butyl rubber, coated on the upper surface with an alkali-resistant non-woven fabric made of modified polypropylene with a high specific surface area to ensure excellent adhesion of the membranes that will cover the tape during the waterproofing process. EC1 Plus Gev Emicode A+ Indoor air emissions Screeds Self-levelling compounds Levelling Compounds Plaster and skim coats 1 - HydroCorner SA Internal - External Technical Specifications

Existing tiles Radiant heating systems Concrete and reinforced concrete Plasterboard Plaster and anhydrite Fibre-cement sheets Lightweight panels Bituminous membranes and tar-based membranes Uses Interior - exterior Floors - walls Overlay Terraces and balconies SPA and Hammam Indoor wet areas (bathrooms, showers) Facades Industrial flooring Residential, public and commercial construction Limitations Do not leave the product exposed Do not use for waterproofing structural joints Do not use in swimming pools, baths or fountains Thoroughly remove dust and condensation from the surfaces before Refer...

In accordance with standard UNI 11493-1, substrates and coatings based on concrete, cement and plaster must be adequately cured and must not show signs of excessive moisture emission, condensation, efflorescence or hydrostatic problems. Substrates must be mechanically sound and free from loose particles, grease, oil, paint, wax and rising damp. Cement-based plasters must be allowed to cure for at least one week per centimetre of thickness. Cement-based screeds must have a total curing time of at least 28 days or be laid using the innovative X-Floor® and X-Floor® Pro anti-crack screeds. Surfaces...

Powered by TCPDF (www.tcpdf.org) Safety Information In accordance with current European regulations (Reg. 1907/2006/EC – REACH), the product is classified as an article and does not require a safety data sheet. PRODUCT FOR PROFESSIONAL USE Legal notices The information and specifications set out in this technical data sheet are based on our best experience. However, as we are unable to directly influence site conditions or the execution of the works, these are general guidelines which do not in any way bind our Company. We therefore recommend carrying out a preliminary test to verify the product’s...