HydroCorner Internal - External Technical Specifications Special pre-formed anti-fracture pieces for waterproofing corners in combination with the continuous elastic anti-fracture tape HydroBand Anti-Fracture in swimming pools, terraces and showers. Product description Special pre-formed anti-fracture pieces for waterproofing corners in combination with the continuous elastic anti-fracture tape HydroBand AntiFracture in swimming pools, terraces and showers. They can be easily bonded to cementitious substrates and ceramic tiles using HydroPad, a single-component, breathable, waterproof tri-polymer gel, or Litokol cementitious waterproofing products. HydroBand multi-layer technology consists of an elastic, waterproof polymer film made of modified polyethylene, coated on both sides with a non-woven fabric made of modified polypropylene with a high specific surface area to ensure excellent adhesion to substrates during the waterproofing process. EC1 Plus Gev Emicode A+ Indoor air emissions Screeds Self-levelling compounds Levelling Compounds Plaster and skim coats Existing tiles Radiant heating systems Concrete and reinforced concrete Plasterboard 1 - HydroCorner Internal - External Technical Specifications

Plaster and anhydrite Fibre-cement sheets Lightweight panels Uses Interior - exterior Floors - walls Overlay Swimming pools and fountains Terraces and balconies SPA and Hammam Indoor wet areas (bathrooms, showers) Facades Industrial flooring Residential, public and commercial construction Limitations Do not leave the product exposed Do not use for waterproofing structural joints Refer to national standards, such as UNI 11493 Multi-layer tape consisting of: - Modified polypropylene non-woven fabric covering - Waterproof, elastic polymer film made from modified polyethylene - Modified polypropylene...

Operating temperatures Application Specifications Preparation of substrates In accordance with standard UNI 11493-1, substrates and coatings based on concrete, cement and plaster must be adequately cured and must not show signs of excessive moisture emission, condensation, efflorescence or hydrostatic problems. Substrates must be mechanically sound and free from loose particles, grease, oil, paint, wax and rising damp. Cement-based plasters must be allowed to cure for at least one week per centimetre of thickness. Cement-based screeds must have a total curing time of at least 28 days or be laid...

Powered by TCPDF (www.tcpdf.org) Safety Information In accordance with current European regulations (Reg. 1907/2006/EC – REACH), the product is classified as an article and does not require a safety data sheet. PRODUCT FOR PROFESSIONAL USE Legal notices The information and specifications set out in this technical data sheet are based on our best experience. However, as we are unable to directly influence site conditions or the execution of the works, these are general guidelines which do not in any way bind our Company. We therefore recommend carrying out a preliminary test to verify the product’s...