HydroCollar Technical Specifications Special pre-formed, crack-resistant seals for waterproofing pipe penetrations and installations in swimming pools, terraces and showers. Product description Special pre-formed, crack-resistant collars for waterproofing pipe and service penetrations in swimming pools, terraces and showers prior to the laying of ceramic tiles and natural stone. They can be easily bonded to cementitious substrates and ceramic tiles using SafetyGel, a continuous, watertight and crack-resistant elastic gel membrane, and HydroPad, a single-component, breathable, waterproof tripolymer gel, or Litokol cementitious waterproofing products. HydroCorner multi-layer technology consists of a waterproof polymer film made of modified polyethylene, coated on both sides with a non-woven fabric made of modified polypropylene with a high specific surface area to ensure excellent adhesion to substrates during the waterproofing process. HydroCollar 8 – gasket size: 120x120 mm – hole diameter: 8 mm – pipe diameter: 15–20 mm HydroCollar 35 – gasket size: 180x180 mm – hole diameter: 35 mm – pipe diameter: 45–60 mm HydroCollar 65 – gasket size: 250x250 mm – hole diameter: 65 mm – pipe diameter: 75–125 mm EC1 Plus Gev Emicode A+ Indoor air emissions

Self-levelling compounds Levelling Compounds Plaster and skim coats Existing tiles Radiant heating systems Concrete and reinforced concrete Plasterboard Plaster and anhydrite Fibre-cement sheets Lightweight panels Uses Interior - exterior Floors - walls Overlay Swimming pools and fountains Terraces and balconies SPA and Hammam Indoor wet areas (bathrooms, showers) Facades Industrial flooring Residential, public and commercial construction Limitations Do not leave the product exposed Refer to national standards, such as UNI 11493 HydroCollar 8 dimensions HydroCollar 35 dimensions Dimensions of...

Application Specifications Operating temperatures In accordance with standard UNI 11493-1, substrates and coatings based on concrete, cement and plaster must be adequately cured and must not show signs of excessive moisture emission, condensation, efflorescence or hydrostatic problems. Substrates must be mechanically sound and free from loose particles, grease, oil, paint, wax and rising damp. Cement-based plasters must be allowed to cure for at least one week per centimetre of thickness. Cement-based screeds must have a total curing time of at least 28 days or be laid using the innovative X-Floor®...

Powered by TCPDF (www.tcpdf.org) Safety Information In accordance with current European regulations (Reg. 1907/2006/EC – REACH), the product is classified as an article and does not require a safety data sheet. PRODUCT FOR PROFESSIONAL USE Legal notices The information and specifications set out in this technical data sheet are based on our best experience. However, as we are unable to directly influence site conditions or the execution of the works, these are general guidelines which do not in any way bind our Company. We therefore recommend carrying out a preliminary test to verify the product’s...