HydroBand SA Anti-Fracture Technical Specifications Continuous, elastic, crack-resistant, self-adhesive butyl tape for the waterproofing of corners, edges, wall-to-floor and wall-to-wall transitions, changes in slope and perimeter joints in swimming pools, terraces and showers. Product description Continuous, elastic, crack-resistant, self-adhesive butyl tape for waterproofing corners, edges, wall-to-floor and wall-to-wall transitions, changes in slope and perimeter joints on terraces, in damp rooms and showers. It is easy to apply to cementitious substrates and ceramic tiles: the protective liner with overlapping flaps on the reverse side allows for easy removal and positioning; smooth out the self-adhesive tape. No waiting time is required for the adhesive to set, and it is suitable for use on bituminous membranes and tar-based membranes. The HydroBand SA Anti-Fracture multi-layer technology consists of an elastic, waterproof polymeric film made of age-resistant modified butyl rubber, coated on the upper surface with an alkali-resistant non-woven fabric made of modified polypropylene with a high specific surface area to ensure high adhesion of the membranes that will cover the tape during the waterproofing process. For a perfect seal at corners, special pre-formed HydroCorner SA Internal pieces for internal corners and HydroCorner SA External pieces for external corners, engineered using the same technology, are available. EC1 Plus Gev Emicode A+ Indoor air emissions Technical Specifications

Self-levelling compounds Levelling Compounds Plaster and skim coats Existing tiles Radiant heating systems Concrete and reinforced concrete Plasterboard Plaster and anhydrite Fibre-cement sheets Lightweight panels Bituminous membranes and tar-based membranes Uses Interior - exterior Floors - walls Overlay Terraces and balconies SPA and Hammam Indoor wet areas (bathrooms, showers) Facades Industrial flooring Residential, public and commercial construction Limitations Do not leave the product exposed Do not use for waterproofing structural joints Do not use in swimming pools, baths or fountains....

Operating temperatures Application Specifications Technical Specifications

In accordance with standard UNI 11493-1, substrates and coatings based on concrete, cement and plaster must be adequately cured and must not show signs of excessive moisture emission, condensation, efflorescence or hydrostatic problems. Substrates must be mechanically sound and free from loose particles, grease, oil, paint, wax and rising damp. Cement-based plasters must be allowed to cure for at least one week per centimetre of thickness. Cement-based screeds must have a total curing time of at least 28 days or be laid using the innovative X-Floor® and X-Floor® Pro anti-crack screeds. Surfaces...

Powered by TCPDF (www.tcpdf.org) determine whether or not it is suitable for the intended use and, in any event, assumes all liability that may arise from its use. Always refer to the latest updated version of the Technical Data Sheet, available on the website www.litokol.com Specification item The waterproofing of wall-to-floor and wall-to-wall junctions on terraces, balconies, showers, spas, hammams and damp rooms where ceramic tiles, natural stone and mosaics are to be laid subsequently must be carried out using continuous, self-adhesive, elastic, anti-fracture butyl tape such as HydroBand...