HydroBand Joint Anti-Fracture Technical Specifications Continuous elastic anti-fracture tape made of thermoplastic rubber (TPE) for the waterproofing of structural joints in swimming pools, terraces and outdoor areas. Product description Continuous elastic anti-fracture tape made of thermoplastic rubber (TPE) for the waterproofing of structural joints in swimming pools, terraces and outdoor areas. It bonds easily to concrete, cementitious substrates and ceramic tiles using the high-performance, permanently elastic, crack-resistant epoxy gel PowerGel Pro Max or, alternatively, the epoxy gel CrackRepair The HydroBand Joint Anti-Fracture multi-layer technology consists of a nonwoven fabric made of modified polypropylene with a high specific surface area and a central strip coated with highly deformable and elastic thermoplastic elastomer (TPE), featuring superior elongation in the transverse direction (rigidity in the longitudinal direction). The non-woven fabric with a high specific surface area ensures excellent adhesion to substrates during waterproofing and gives the tape a thin profile in the sections to be bonded under tiles. High chemical resistance. Screeds Levelling Compounds Plaster and skim coats Existing tiles Concrete and reinforced concrete Plasterboard Fibre-cement sheets 1 - HydroBand Joint Anti-Fracture Technical Specifications

Interior - exterior Floors - walls Overlay Swimming pools and fountains Terraces and balconies SPA and Hammam Indoor wet areas (bathrooms, showers) Facades Industrial flooring Residential, public and commercial construction Limitations Do not leave the product exposed Do not use tile adhesives to create tape-on-tape overlaps Refer to national standards, such as UNI 11493 Product Composition Effective waterproof width Shelf life Customs heading Multi-layer tape consisting of: - Modified polypropylene non-woven fabric - Waterproof, elastic polymer film made from modified polyethylene Unlimited...

In accordance with standard UNI 11493-1, substrates and coatings based on concrete, cement and plaster must be adequately cured and must not show signs of excessive moisture emission, condensation, efflorescence or hydrostatic problems. Substrates must be mechanically sound and free from loose particles, grease, oil, paint, wax and rising damp. Cement-based plasters must be allowed to cure for at least one week per centimetre of thickness. Cement-based screeds must have a total curing time of at least 28 days or be laid using the innovative X-Floor® and X-Floor® Pro anti-crack screeds. Surfaces...

Powered by TCPDF (www.tcpdf.org) Safety Information In accordance with current European regulations (Reg. 1907/2006/EC – REACH), the product is classified as an article and does not require a safety data sheet. PRODUCT FOR PROFESSIONAL USE Legal notices The information and specifications set out in this technical data sheet are based on our best experience. However, as we are unable to directly influence site conditions or the execution of the works, these are general guidelines which do not in any way bind our Company. We therefore recommend carrying out a preliminary test to verify the product’s...