HydroBand Gel Technical Specifications Fast-setting, single-component sealing gel for bonding and waterproof sealing of HydroBand accessories Product description Fast-setting, single-component sealing gel for bonding HydroBand AntiFracture tape and Hydro Corner Internal – External corner pieces, and for their waterproof sealing. The sealing gel is easy to mix and apply, and provides bonding and watertight sealing for tapes and accessories in a very short time, enabling you to cope with the challenging weather conditions on outdoor construction sites. EC1 Plus Gev Emicode A+ Indoor air emissions HydroProof Anti-Fracture, a pre-formed waterproofing vapour barrier membrane supplied in rolls, for under-tile waterproofing in swimming pools, terraces, damp rooms and showers. LitoTex Extreme, a pre-formed, decoupling, anti-crack and waterproofing membrane for the installation of floor and wall coverings in ceramic tiles, porcelain stoneware and natural stone, including removable tiles. Interior – exterior Floors – walls Technical Specificati

Overlay Terraces and balconies SPA and Hammam Indoor wet areas (bathrooms, showers) Residential, public and commercial construction The ambient and surface temperature must be above 5°C at the time of installation and for 72 hours after application Do not apply to wet surfaces, damp substrates (> 5% moisture content) or those subject to rising damp Do not use as a surface waterproofing agent Do not apply if there is condensation on the surfaces Do not apply to uneven or excessively rough substrates. Apply a skim coat with HydroLevel® Do not use where negative hydraulic pressures are present Do...

To fully appreciate the superior flow properties and thixotropy of the innovative Gel mixture, we recommend mixing the product using the specified mixing ratio. Pour the correct amount of water into a container and slowly add the product, mixing with a mechanical mixer until a creamy, homogeneous mixture free from lumps is obtained. Leave the mixture to rest for approximately 2 minutes, during which time the polymer gel develops fully: the hydraulic binders, fillers and cellulose hydrate evenly, the micro-air bubbles incorporated during mixing are eliminated, and the polymers begin the activation...

Specification item The bonding and waterproof sealing of the HydroBand Anti-Fracture tape and the pre-formed HydroCorner corners onto HydroProof Anti-Fracture or LitoTex Extreme membranes is carried out using a fast-setting, singlecomponent sealing gel such as HydroBand Gel by Litokol Lab SpA In accordance with standard UNI 11493-1, substrates and coatings based on concrete, cement and plaster must be adequately cured and must not show signs of excessive moisture emission, condensation, efflorescence or hydrostatic problems. Substrates must be mechanically sound and free from loose particles,...

Powered by TCPDF (www.tcpdf.org) Product details No. 617 Revision No. 1 Date: January 2021 Litokol Lab Spa Via G. Falcone 13/1 42048 Rubiera RE Italy Tel. +39 0522 622811 [email protected] www.litokol.com Technical Specifications