HydroBand Anti-Fracture Technical Specifications Continuous anti-fracture elastic tape for the waterproofing of corners, edges, wall-tofloor and wall-to-wall junctions, changes in gradient and movement joints (segmentation, expansion and decoupling) and perimeter joints in swimming pools, terraces and showers. Product description Continuous anti-fracture elastic tape for the waterproofing of corners, edges, wall-to-floor and wall-to-wall junctions, changes in gradient and movement joints (segmentation, expansion and decoupling) and perimeter joints in swimming pools, terraces and showers. It bonds easily to cementitious substrates and ceramic tiles using HydroPad, a single-component, breathable, waterproof tri-polymer gel, or Litokol cementitious waterproofing products. HydroBand multi-layer technology consists of an elastic, waterproof polymer film made of modified polyethylene, coated on both sides with a non-woven fabric made of modified polypropylene with a high specific surface area to ensure excellent adhesion to substrates during the waterproofing process. For a perfect seal at corners, pre-formed special HydroCorner Internal pieces for internal corners and HydroCorner External pieces for external corners, engineered using the same technology, are available. EC1 Plus Gev Emicode A+ Indoor air emissions Screeds Self-levelling compounds Technical Specifications

Levelling Compounds Plaster and skim coats Existing tiles Radiant heating systems Concrete and reinforced concrete Plasterboard Plaster and anhydrite Fibre-cement sheets Lightweight panels Uses Interior - exterior Floors - walls Overlay Swimming pools and fountains Terraces and balconies SPA and Hammam Indoor wet areas (bathrooms, showers) Facades Industrial flooring Residential, public and commercial construction Limitations Do not leave the product exposed Do not use for waterproofing structural joints Refer to national standards, such as UNI 11493 Product Composition Effective waterproof width...

In-house method In-house method In-house method In-house method In-house method In-house method In-house method Salt water (20 g/l seawater) + Operating temperatures ApplicationSpecifications Operating temperatures Preparation of ln accordance with standard UNI 11493-1, substrates and coatings based btt on concrete, cement and plaster must be adequately cured and must not substrates show signs of excessive moisture emission, condensation, efflorescence or hydrostatic problems. Substrates must be mechanically sound and free from loose particles, grease, oil, paint, wax and rising damp. Cement-based...

Powered by TCPDF (www.tcpdf.org) products. Refer to the technical data sheets for the products listed before use. Do not walk on or move the bonded tapes until the HydroPad membrane has set Do not use for applications not listed on this technical data sheet For further information, please contact Litokol’s Technical Customer Service on +39-0522-622811 or via [email protected] Safety Information In accordance with current European regulations (Reg. 1907/2006/EC – REACH), the product is classified as an article and does not require a safety data sheet. PRODUCT FOR PROFESSIONAL USE Legal...