EpoxyElite EVO TWO-COMPONENT ACID-RESISTANT EPOXY GROUT FOR INSTALLATION AND GROUTING OF CERAMIC, PORCELAIN AND MOSAIC TILES WITH JOINTS FROM 1/16 TO 9/16 INCH (1 TO 15 mm) WIDE. FOR INTERIORS AND EXTERIORS. SUITABLE FOR UNDERFLOOR HEATING. ZHERORISK TECHNOLOGY OFFERS VERY LOW VOLATILE ORGANIC COMPOUND EMISSION RATE. Two-component acid-resistant epoxy grout. Part A consists in a mix of epoxy resin, selected inert fillers with fine granulometry, pigments and specific organic additives. Component B consists in an innovative organic catalyst with minimal exposure risks for users. Once combined, the two components form a creamy and fluid mix, which is also suitable for vertical application with non-sag. Once set, the product reaches very high performance levels in terms of mechanical strength and chemical resistance. ADVANTAGES / FEATURES Unlike other epoxy grouts on the market, the catalyst (Part B) is labeled only as an irritant It is neither corrosive nor hazardous for the environment User-friendly and very safe product to work with The fine granulometry of the aggregates gives the grout a particularly smooth and compact surface with a high aesthetic impact and minimum dirt pick-up Color range including traditional shades in line with the current trends of the ceramic sector Stable and consistent colors No restrictions for transport over road, sea, air and rail Product with high mechanical strength, practically zero water absorption and high chemical resistance Suitable for interior and exterior floor and wall applications, even in severe operating conditions The product does not contain cement, eliminating efflorescence typical of cementitious products Will not support the growth of fungi and molds Product exhibiths Very low volatile organic compound (VOC). Complies with the most stringent Global Air Quality Regulations. 11lb (5 kg) buckets (A + B) - 1,102.3lb (500 kg) standard pallet (100 buckets) 22lb (10 kg) buckets (A + B) - 970lb (440 kg) standard pallet (44 buckets) Intended uses Interiors and exteriors Floors and walls Underfloor heating Facades Overlaying Terraces and balconies Residential, public, commercial building Indoor wet areas (bathrooms, shower enclosures) Tanks, swimming pools, fountains SPAS and Saunas Industrial flooring Dairy factories, meat processing, food industry Materials Ceramic and porcelain tiles Single fired Double fired Terracotta - Clinker Marble – Granite – Stone Natural stones Porcelain stoneware Ceramic and vitreous mosaics Thin laminated stoneware slabs Large-Format tiles and panels Slabs 126x63 in (320x160 cm) Recomposed stone made with resin or

Typical applications include: Suitable for the installation and acid-resistant grouting of ceramic, porcelain and mosaic tiles with joints between 1 and 15 mm (0.039 and 0.59in) wide, on interior and exterior walls and floors. Suitable for applications where the surfaces are exposed to aggressive chemical substances (see chemical resistance table) such as dairy factories, abattoirs, pubs, food factories in general. Suitable for applications with severe operating conditions such as swimming pools, Turkish baths, Jacuzzis, floors subject to heavy traffic, and tiles exposed to extreme temperature...

Spot tests should always be performed. Use as adhesive The substrates must be clean, solid, compact, crack-free, properly cured and without rising damp. If the substrate is not perfectly flat or the level is incorrect, it can be evened before installation using suitable leveling or self-leveling products, for example Litoliv S40 Eco, Litoliv Extra 15, Litoliv Express or Litoplan Smart. Component A 93.7 parts by weight. Component B: 6.3 parts by weight Note: The two components are pre-batched in their respective packaging. Cut off a corner of the bag containing the catalyst (component B) in the...

Replace the felt pad and sponge when they become impregnated with resin and can no longer be cleaned. Any halos or clear product residue can be removed from the surface of the tiles after about 24 hours or after the joint has set (depending on the temperature), using the special detergents Litonet EVO (for floors) and Litonet Gel EVO (for walls). Refer to the technical data sheet for information on how to used them correctly. Method with single disc machine After removing any excess grout from the surface, sprinkle plenty of clean water over the grouted surface. Then start cleaning with the single...

ITEM SPECIFICATION #The installation and acid-resistant grouting of ceramic, porcelain and mosaic tiles with joints between 1 and 15 mm (0.039 and 0.59 in) wide must be carried out with a two-component colored epoxy grout in class RG according to EN 13888 and class R2T according to EN 12004, such as EpoxyÉlite EVO by Litokol S.p.A. IDENTIFICATION DATA Appearance Appearance Color Customs code Shelf life Component A: colored paste Component B: thick liquid See color chart 35069190 24 months in original packaging in a dry place. Protect against frost. APPLICATION DATA Mix ratio Mix ratio Consistency...

CONSUMPTION TABLES CONSUMPTION TABLES FORMULA FOR CALCULATION OF CONSUMPTION: (A+B)/(AxB) x C x D x 8.0 = lb/ft2 A = tile length (in mm) (in inches) B = tile width (in mm) (in inches) C = tile width (in mm) (in inches) D = joint width (in mm) (in inches) In regards to the calculation of consumption for the different tile sizes and joint widths, refer to the product calculator available at www.litokol.it

CHEMICAL RESISTANCE TABLE The table provides a summary of the chemical resistance tests performed according to Regulation UNI EN 12808-1 Chemical resistance of ceramic coverings grouted with EpoxyElite EVO - Intended use: industrial floors Group 24 7 days 14 days 28 days hours Acids Acetic acid Hydrochloric acid Citric acid Lactic acid Nitric acid Pure Oleic acid Sulfuric acid Saturated solutions at 20°C (+68°F) Oils and fuels Enzymatic cleaners Solvents Tartaric acid Ammonia in solution Caustic soda Sodium hypochlorite in solution Conc. Active IC Potassium hydroxide Calcium Chloride Sodium Chloride...