FastGel® Pro Technical Specifications A science-based, high-performance epoxy gel with permanent elasticity, crack prevention and accelerated curing: Fluidotixo® - C5, designed to securely bond tiles, porcelain stoneware, extra-large slabs, marble and natural stone – including unstable varieties – of any size to any substrate, even at very low temperatures. Product description High-strength epoxy gel with permanent anti-fracture elasticity and accelerated cross-linking for securely bonding porcelain stoneware, slabs, mosaics, marble and natural stone to any substrate, even at very low temperatures. Designed for rapid monolithic bonding of any material to any substrate, ensuring the highest level of application safety. Thanks to state-of-the-art features, the mixture is extremely creamy, freeflowing and thixotropic, retaining its shape and thickness on both floors and walls. FastGel® Pro is engineered for the installation of large-format tiles and slabs of any type and size in high-traffic areas, even on cracked substrates (up to 2 mm) and those that are not perfectly dry (residual moisture <5%). The epoxy gel helps to dissipate and neutralise substrate movements and tile expansion, and distributes heavy loads evenly without causing stress. The innovative gelation-based bonding technology ensures stable and secure installation directly onto single- or two-component polymer and polymer-cement membranes without triggering corrosive chemical reactions that could compromise the integrity of the adhesive/waterproofing system. It ensures rapid, monolithic structural bonding, with cross-linking even at very low temperatures (down to -5°C), and is designed for winter projects and applications subject to high stresses, such as balconies, terraces, swimming pools and façades, allowing direct application onto difficult substrates such as wood, metal, PVC and fibreglass, where the use of cementitious adhesives is not suitable. Classified as R2T – EN 12004 Technical Speci

TileSafe® System FastGel® Pro, combined with SafetyGel®, forms the High-Adhesion Anti Fracture System - TileSafe® System - engineered for the installation of large-format tiles and slabs of any type and size in high-traffic areas, even on cracked substrates (up to 3 mm). The system helps to dissipate and neutralise substrate movements and tile expansion, and distributes heavy loads evenly without causing stress. , . Blend of epoxy resins of varying molecular weights under our own licence formu|a a blend of micro-granules of pure white Carrara marble and quartz sand Fine particle size - range...

Sub-Zero Application technology opens up new application possibilities, making FastGel® Pro ideal for winter installations, sites in unheated environments or critical operational situations, without compromising the reliability, curing properties and long-term durability of the adhesive system. Accelerated-curing, elastic, crack-resistant bonding FastGel® Pro provides a bonded installation with exceptional tensile and shear adhesion; it is the ideal technical solution for surfaces prone to deformation and extra-large ceramic formats: perfect for large-format tiles and slabs of any type and size...

ISO 13007 MED 2014/90/EU EC1 Plus Gev Emicode A+ Indoor air emissions Porcelain stoneware Ceramic tiles Large formats Laminated stoneware slabs Marble – Granite – Stone materials Natural stone Ceramic and glass mosaics Terracotta – Klinker Resin- or cement-based composites Insulating and sound-absorbing panels for interiors Screeds Self-levelling compounds Levelling compounds Plaster Plasterboard Plaster and anhydrite Existing tiles Concrete Radiant heating systems Waterproofing products of any kind Decoupling membranes Aerated concrete Fibre-cement sheets Concrete Wood Metal PVC Fibreglass Adhesive...

In combination with SafetyGel® indoors Cracked substrates New, uncured substrates or substrates of a different nature Change to a different laying pattern or tile size Installation near thresholds Installation over utility trenches Installation near expansion joints – partition joints Refer to national standards, such as UNI 11493. Ensure a full bed outdoors or under high loads. Protect the tiled surface from heavy rain for at least 24 hours. Ambient temperature and humidity may affect the workability and setting times of the gel. Do not add water, lime, cement or any other foreign materials...

Mixing ratio Mixing ratio Consistency of the mix Specific gravity of the mixture Pot life Applicable thicknesses Open time Recording time Application Application temperatures Drying time for grouting: Operating temperature Cleaning of equipment Part A: 92.6 parts by weight Part B: 7.4 parts by weight Epoxy gel 1.70 kg/dm3 Notched trowel suitable for the tile size and substrate From -5°C to +30°C 48 hours 24 hours 10 hours 4 hours 72 hours 48 hours 24 hours 6 hours - Swimming pools: 7 days With water when the product is fresh. Mechanically once the product has 3.5 mm trowel: ~ 1.8 kg/m2 6 mm trowel:...

In any case, it is essential to consult the relevant technical data sheets to ensure the correct use of the products indicated. To fully appreciate the superior flow and thixotropy of the innovative Epoxy Gel compound, we recommend mixing the product using the specified mixing ratio. Cut a corner of the sachet containing the polymer catalyst (Part B) and pour it into the container holding Part A. It is recommended to pour out the entire contents of the catalyst, gradually rolling and squeezing the sachet from the sealed end towards the cut end. Polymerisation begins when the epoxy component is...

Special Applications TileSafe® System To create the High-Adhesion Anti-Crack System, apply SafetyGel® as a ‘High-Adhesion Anti-Crack Gel Safety Membrane’ (see the SafetyGel® technical data sheet). Once the final coat of SafetyGel® has dried completely, apply a skim coat of FastGel® Pro using the smooth side of the trowel and, immediately afterwards, apply the desired thickness using the notched side. Protective barrier When waterproofing and laying ceramic tiles or mosaics simultaneously in shower cubicles and internal damp areas, apply a layer of at least 1 mm of Gel to the area to be waterproofed...