Faster EVO ACCELERATOR ADDITIVE FOR EPOXY RESINS Faster EVO is an accelerator additive for epoxy-resin based products. Adding Faster EVO as the third component accelerates the epoxy system reaction reducing the installation time of the adhesive or grout. Intended uses Interiors Floors and walls Underfloor heating Residential, public, commercial building 1.8oz (50 g) pre-batched packs for the 5.5 lb (2.5 kg) pack of Starlike® EVO. 7.05 oz (200 g) pre-batched packs for the 110 lb (10 kg) pack of Litoelastic EVO, Litomastic EVO and Litoelastic EVO FR. 2 x 50g (1.76 oz) pre-batched packs for the 5 kg (11lb) pack of EpoxyElite EVO or Litoelastic EVO FR. Refer to the APPLICATION section of the additive. Pour part B (catalyst) onto part A (paste). We recommend pouring all the catalyst contained in the bag. Mix, preferably using an electric drill with mixing paddle at low speed (≈ 300/min.) until a consistent mix is obtained without lumps. Pour the third Faster EVO pre-batched liquid component and mix using an electric drill with mixing paddle at low speed until a smooth mix is obtained. Hand mixing is not recommended. The components are pre-batched in their packages, thus preventing mixing errors. Respect the mix ratio Do not mix the product with solvents Do not add lime, cement or other foreign materials to the product Do not mix partial quantities of the components without using a scale; different mix ratios will compromise the proper setting of the product Spread the product at temperatures between 40°F and 90°F Do not use for exteriors Do not use the product for applications not stated in this technical sheet If in doubt, contact the Litokol S.p.A Technical Help Service.

Powered by TCPDF (www.tcpdf.org) SAFETY INFORMATION Consult the product safety data sheet, available on request. PRODUCT FOR PROFESSIONAL USE IDENTIFICATION DATA Appearance Customs code Shelf life Straw yellow liquid 32099000 24 months in original packaging in a dry place. APPLICATION DATA Mix ratio Mix ratio Specific gravity of mix Pot life Acceptable application temperatures Set to light foot traffic Serviceability Temperatures How to clean equipment Faster EVO: PRODUCT = 1: 50 (in weight) 2% 1.60 kg/dm3 (3.53lb/in3) Approx. 45 minutes From 23°F to +86°F (+5°C to +30°C) Approx. 6 hours From...