With fine-grain quartz spheres

Smooth and compact joints 14 Technical features

Zherorisk® is a research initiative carried out by Litokol’s R&D division, with the participation of the University of Modena and Reggio Emilia and external research institutes, on raw materials and ways of combining them, aimed at developing an innovative generation of environmentally-friendly building products with “zero risks”.

The aim of Zherorisk® products is to guarantee the safety of people through three aspects: safeguarding the health of professional operators, the air quality in homes and all environments, and the transportation of goods. The Zherorisk® research initiative results in the creation of new families of innovative products with identical environmentally-friendly features. CERTIFICATIONS The challenge presented by the Zherorisk® research initiative was to drastically reduce the emission of volatile organic compounds (VOC), the main cause of indoor pollution, without altering the chemical and physical...

EpoxyElite EVO is a two-part anti-acid epoxy mortar for the installation and grouting of ceramic tiles and mosaics with 1 to 15 mm joints, on indoor and outdoor floors and walls. It has an ultra-low emission of volatile organic substances (VOC). Part A consists of a mixture of epoxy resin, fine-grain siliceous aggregates and specific organic additives. Like all Zherorisk® products, part B of EpoxyElite EVO consists of an innovative organic catalyst which is non-corrosive, nontoxic and harmless for the environment, and is not subject to restrictions for road (ADR), air and rail transport; it does...

e esiv adh and out e gr n-on All-i EpoxyÉlite EVO is a class R2T, high performance, no vertical slip reactive adhesive for the laying of ceramic tiles indoors and outdoors on floors and walls. Excellent results in the adhesion strength test, much higher than the standard limit of >2 N/mm². As an adhesive, it is recommended when installing thin mosaics. ADHESIVE Trowel notch

Among the many features introduced, Zherorisk® technology has allowed the use of fine-grain quartz micro-granules, as aggregates, compared to the coarse grain variety commonly used in similar standard products, available on the market. In terms of visual appeal, the joints not only look smoother and more compact, they are also able to absorb rays of light without any refraction. The colours, therefore, have a soft and intense appearance which blends perfectly with the surface of the times, making the joints, in matching colours, virtually invisible.

standard grain size more irregular and less compact surface with higher degree of staining FINE GRAIN COARSE GRAIN fine grain size particularly smooth and compact grout with a high aesthetic impact and minimum staining

The fineness of the quartz grains allows a much more fluid application of the mix, making it easier to fill the joints in less time -and with less work ^ ;

Joints made with EpoxyElite EVO stay looking good for longer because they are easy to clean, with excellent water repellency and do not absorb any kind of stain, even the toughest industrial stains. * Long-lasting colour Water-repellent Easy to clean Stain resistant Greater absorbency ^lEasily stained ,Si ■Possible formation of mould ILower mechanical resistance

Excellent compressive strength, much higher than the standard limit of >45 N/mm2 and flexural strength much higher than the standard limit of >30 N/mm2 Grouting with EpoxyElite EVO can tackle even the most extreme industrial applications where the floors are subject to strong mechanical stress such as the transit of lift and pallet trucks. Due to its excellent resistance to chemicals, it is the ideal grouting for the food industry (oil mills, cured meat factories, breweries, slaughterhouses, fast food outlets). Ideal in demanding operating conditions, such as swimming pools, Turkish baths, whirlpools,...

The colour s An impeccable joint is guaranteed because it is strong, water repellent and easy to clean, as well as having a highly aesthetic appeal, ideal for any industrial, residential and commercial installation. A rational choice of colours equally divided between warm and cool shades makes EpoxyElite EVO particularly suitable for grouting ceramics and mosaics indoors and outdoors on flooring and walls, in any residential and commercial setting, including heated floors, bathrooms and shower cubicles, kitchen counter tops, terraces and balconies.

Particularly impressive is the aesthetic rendering of joints on timber-effect and natural stone-effect ceramic floors

100 bianco assoluto 110 grigio perla

Identification data Appearance Part A: thick paste Part B: liquid Colours 100 Bianco Assoluto 110 Grigio Perla 125 Grigio Cemento 140 Nero Grafite 205 Travertino 210 Greige 225 Tabacco 230 Cacao Classification according to EN 13888: RG - reactive grout sealant Classification according to EN 12004: R2T - Improved reactive no vertical slip adhesive Customs code: 35069190 Shelf life: 24 months in original packaging. Keep away from frost. Application data Ready for grouting Floor installation with standard setting adhesive: 24 hours Floor installation with quick setting adhesive: 4 hours Cladding...

EpoxyÉlite EVO is also produced in an FR (Flame Retardant) version for use in the maritime sector. The certificate of compliance for marine equipment has been granted for a kit consisting of EpoxyÉlite EVO FR grout, as well as Litoelastic EVO FR adhesive, according to Directive 2014/90/EU (2010 FTP Code). The certification relates to the determination of surface flammability of surface materials and primary deck coverings, in addition to the calorific potential. The kit satisfies the requirements of Part 5 of the FTP Code 2010 of the IMO (finishing materials for bulkhead and ceiling linings).

Mix using an electric drill equipped with mixing paddle. Scrape the walls of the bucket to eliminate all parts of non-catalysed product. The joints must be dry. Apply the paste in the joints using a green rubber float (item 946GR), with diagonal movements in the direction of the joints. Remove the excess product. The grout must be cleaned while the product is still wet. Sprinkle clean water. Initial cleaning with a damp white felt (item 109GBNC) and circular movements. Ensure no water enters the joints. Second cleaning cycle with a sweepex sponge (item 128G0001). Any stains of the transparent...