Catalogs >
LITOKOL >
Coverflex

Coverflex
1 / 6Pages

Catalog excerpts

Coverflex TWO-COMPONENT CEMENTITIOUS MORTAR, ELASTIC UP TO -20°C, (-4°F) CHLORINE-RESISTANT, APPLICABLE WITH ROLLER AND BRUSH, FOR WATERPROOFING OF INDOOR WET AREAS, BALCONIES, TERRACES, TANKS AND SWIMMING POOLS IN CLASS CMO2P ACCORDING TO UNI EN 14891 PRODUCT WITH LOW VOLATILE ORGANIC COMPOUND EMISSION RATE. Two-component cementitious mortar. The powder part is made up of cements, inert fillers and special organic additives. The liquid part consists in a synthetic resin in aqueous dispersion, solvent-free and highly elastic even at very low temperatures. By mixing the two components together (already pre-batched in their respective packaging), a plastic mortar is obtained, easy to apply with a smooth trowel, roller and brush, particularly adhesive and fluid, which can be applied to floors and walls with no dripping up to a maximum thickness of 2 mm (0.079in). ADVANTAGES / FEATURES • High elasticity and waterproofing • Excellent adhesion to concrete, all cementitious substrates and also smooth, compact and non-absorbent substrates such as ceramic and porcelain tiles, natural and polished stones, without the need for primer • For interior and exterior wall and floor coverings • Allows waterproofing repairs on balconies and terraces directly over the existing ceramics without the need for demolition • Maintains excellent pot life over time, without any bothersome thickening • Product with low volatile organic compound emission rate, compliant with Class A+ according to French Regulations • Rapid installation times since it can also be applied with a roller and brush. Ideal for large surfaces or complex structures making application with a smooth trowel difficult • Retains its flexibility even at very low temperatures (-4°F), making it suitable for application in particularly cold climates Part A (powder) 44lb (20 kg) bags Part B (liquid) 22lb (10 kg) cans Intended uses Interiors and exteriors Floors and walls Underfloor heating Indoor wet areas (bathrooms, shower enclosures) Overlaying Terraces and balconies Residential, public, commercial building Industrial flooring Tanks, swimming pools, fountains SPAS and Saunas Waterproofing systems Suitable substrates: Cement screeds Self-levelers Cement levelers Existing tiles Existing agglomerates Underfloor heating systems Concrete Gypsum Fiber cement slabs Gypsum-based plasters Aerated concrete Cement plasters Wood panels, type CTBH Lightweight pane

Open the catalog to page 1

WATERPROOFING PLANNING The only way to guarantee the long-lasting performance of ceramic and porcelain tile installations is to properly plan the process. It is therefore advisable to consult the national regulations in force in each country, for example standard UNI 11493 in Italy, which provides all necessary instructions regarding the choice of materials, correct planning, use and installation, so as to ensure all quality, performance and durability standards are safely met. When installing large tiles or low thickness laminated porcelain stoneware slabs, we recommend paragraphs 7.13.8...

Open the catalog to page 2

Component A (powder) 44lb (20 kg) (1 bag) + Component B (liquid) 22lb (10 kg) (1 can) Pour component B (liquid) into a clean container and add component A (powder) while stirring. Mix, preferably using an electric drill with mixing paddle at low speed (≈ 300/min.) until a consistent mix is obtained without lumps. Let the mix rest for about 5 minutes and then briefly mix again for a few seconds. The two components are pre-batched in their packaging, thus preventing mixing errors. Manual mixing or partial mixing of the two components is not recommended. Do not add more water to the mix once...

Open the catalog to page 3

Waterproofing of divider joints 1 – Screed 2 – Joint 3 – Coverflex (1st coat) 4 – Litoband SK Tape 5 – Litomesh 6 – Coverflex (2nd coat) 7 – Litogap 8 – Adhesive in class C2 / R2 9 – Tile 10 – Ottoseal S70 Waterproofing of drains 1 – Screed 2 – Self-Adhesive Drain Collar 3 – Coverflex (1st coat) 4 – Litomesh 5 – Coverflex (2nd coat) 6 – Adhesive in class C2 / R2 7 – Tile 8 – Expansion joint Protection of fronts and edges against outflow 1 – Screed 2 – Coverflex (1st coat) 3 – Litoband SK Tape 4 – Litomesh 5 – Coverflex (2nd coat) 6 – Adhesive in class C2 / R2 7 – Drip tray 8 – Tile 9 –...

Open the catalog to page 4

Waterproofing of swimming pools, Turkish baths and thermal baths 1 – Concrete 2 – Bonding slurry 3 – Litocem or Litocem Pronto 4 – Litoplan Smart 5 – Coverflex (1st coat) 6 – Litoband SK IC (internal corner) 7 – Litoband SK Tape 8 – Litomesh 9 – Coverflex (2nd coat) 10 – Adhesive in class C2 / R2 11 – Tile 12 – Mosaic 13 – Starlike EVO / EpoxyElite EVO / StyleGrout 14 – Ottoseal S70 • It is advisable to perform a hydraulic seal test before installing the covering • For underground tanks, adopt preventive measures against possible capillary rising damp, which may cause the detachment of the...

Open the catalog to page 5

Powered by TCPDF (www.tcpdf.org) APPLICATION DATA Mix ratio Consistency of mix Mix curing time pH of mix Specific gravity of mix Pot life Thickness per coat Total thickness Application Acceptable application temperatures Waiting time between coats Waiting time for installation of covering Serviceability Temperatures How to clean equipment Consumption Standard Initial tensile adhesion strength Tensile adhesion strength after immersion in water Tensile adhesion strength after thermal aging Tensile adhesion strength after freeze/thaw cycles Tensile adhesion strength after contact with...

Open the catalog to page 6

Coverflex 1 / 6Pages

Catalog excerpts

All LITOKOL catalogs and technical brochures

Coverflex
1 / 6Pages