BoostColor Technical Specifications Pro polymer latex to improve the elasticity, adhesion, water resistance and impact resistance of grouts. Product description Highly hydrophobic synthetic latex in aqueous dispersion, based on acrylic polymers. Suitable for grouting balconies, terraces, swimming pools and underfloor heating systems Liquid additive to be used when mixing X-Color 06® or X-Color 2 12® cementitious grouts, as a complete replacement for mixing water. The use of the additive gives the grout high water repellency and improves its deformability and adhesion, making it suitable for heavy-duty applications. Product specifications Appearance Colour Customs heading Responsible Packaging Shelf life Liquid White 39069000 1 kg recycled plastic bottle and 5 kg recycled plastic jerrycan 24 months in the original packaging in a dry place. Keep away from frost. Technical Specifications

Grouts X-Color® 06 X-Color® 2 12 TechnicalSpecifications Compliance with EN 13888 - ISO 13007 Abrasion resistance Compressive strength after 28 days Compressive strength after freeze-thaw cycles Flexural strength after 28 days Flexural adhesion after freeze-thaw cycles Water absorption after 30 minutes Water absorption after 240 minutes Alkali resistance Solvent resistance Acid resistance Good acid-resistant with a pH > 3 Mixing ratio Secondary use Consistency of the mix Creamy mortar Dough proving time 5 minutes Brookfield viscosity (sp 6-20 rpm) 20-30 mPa-s Pot life About 40 mins Specific gravity...

Apply the mixture to the grout lines using a suitable X-Color® rubber trowel until fully saturated, using diagonal movements across the direction of the grout lines and removing any excess material from the surface of the ceramic tiles. Surfaces must be cleaned and the grouting finished whilst the product is still fresh, taking care not to empty the joints. Once the product has lost its workability and become matt (on average after 15–30 minutes, depending on the width of the joints), clean and finish the surface of the grout lines using a damp, well-wrung X-Color® sponge, taking care not to...

Powered by TCPDF (www.tcpdf.org) Specification item The addition of additives to cementitious grouts for the on-site grouting of ceramic tiles, porcelain stoneware, mosaics and marble, to improve flexibility and adhesion, shall be carried out using water-based latex such as BoostColor® from Litokol Lab S.p.A. Product details No. 543 Revision No. 0 Date: 05 25 Litokol Lab Spa Via G. Falcone 13/1 42048 Rubiera RE Italy Tel. +39 0522 622811 [email protected] www.litokol.com Technical Specifications