AQUAMASTER The protective waterproof barrier

Waterproofing products AQUAMASTER Aquamaster is the ready to use liquid membrane that requires no preparation. Once dried, it transforms into a genuine elastic, waterproof membrane. INTENDED USE The Aquamaster membrane can be used for: ● Waterproofing moist environments both indoors and outdoors ● Bathrooms in residential, public/commercial and industrial environments ● Shower enclosures ● Wellness centres and Jacuzzis ● Balconies, terraces ● Swimming pools SUITABLE SUBSTRATES ● Concrete ● Plaster and cement screeds, even with Litocem or Litocem Pronto base ● Cement or Litoplan Smart, Litoplan...

Waterproofing products All the advantages of the most innovative waterproofing NO SEALING STRAPS AND REINFORCEMENT MESH Unlike other waterproofing membranes, it doesn’t require reinforcement mesh or fabric and sealing straps to protect corners and edges, making it more affordable and quick to install. REUSABLE Any left-over material, if properly closed in its original packaging, can be reused even after a few months, thereby avoiding unnecessary waste. FAST APPLICATION ● Second coat after 30’. ● Third coat after 4 hrs. ● Surface ready for laying after 24 hrs with C2 cement adhesives or R2 reactive...

Waterproofing products Conforms to all standards, blocking every drop of water Aquamaster conforms to the DM 01P class as a dispersion liquidapplied waterproof product with improved crack-bridging at low temperature (-5°C) and resistant to contact with chlorinated water in accordance with the European standard EN 14891 on waterproofing products applied in liquid form to be used under ceramic tiles glued with adhesives. Aquamaster is classified by the standard as DM 01P DM = normal dispersion liquid-applied waterproof products 01 = with improved crack-bridging at low temperature (-5°C) P = resistant...

Waterproofing products Crack-bridging capacity The term crack-bridging implies the capacity of a waterproof membrane, by way of its elasticity, to resist against the development and spreading of cracks in the substrate, thereby maintaining its sealing properties and protecting the waterproofed surface. The EN 14891 standard sets a crack-bridging requirement of at least 0.75 mm measured under normal conditions, at low temperature (-5°C class 01) and at very low temperature (8-20°C class 02). Crack-bridging capacity under normal conditions according to EN 14891-A.8.3: ≥ 0,75 mm Crack-bridging capacity...

Waterproofing products Roller application of Aquamaster Brush application of Aquamaster Mosaic or ceramic tile laying 24 hrs after the last coat of Aquamaster In the presence of passing tubes, drains or lights, position the special Litoband SK Pipes Collar and Litoband SK Self-Adhesive Drains Collar sealing pieces. 6

Waterproofing products APPLICATION DATA Application Roller, brush or smooth steel trowel Application temperature Total thickness to be applied in 2/3 subsequent coats 1st coat: 30 minutes – 2nd coat: 4 hours With water when fresh Waiting time before laying ceramics At least 24 hrs from the last coat PERFORMANCE Water impermeability in positive pressure according to EN 14891-A7 (150 kPa for 7 days) No penetration weight increase < 20 grams Initial tensile strength adhesion in accordance with EN 14891-A.6.2 Tensile strength adhesion after immersion in water in accordance with EN 14891-A.6.3 Tensile...

Waterproofing and ceramic or mosaic laying systems for swimming pools 1 - REINFORCED CONCRETE STRUCTURE 2 - LITOPLAN SMART 3 - IDROKOL X20 BASED SLURRY BOND (brush-applied and constituted by 3 parts Portland cement + 1 part water + 1 part IDROKOL X20) 4 - LITOCEM or LITOCEM PRONTO SCREED 8

Waterproofing products 5 - AQUAMASTER (first coat diluted with 10% water) 6 - AQUAMASTER (second coat) 7 - AQUAMASTER (third coat) 8 - LITOPLUS K55 9 - STARLIKE® or LITOCHROM 1-6 (joint grouting) 10 - OTTOPRIMER 1218 + OTTOSEAL S70 www.litokol.it 9

Waterproofing and ceramic or mosaic laying systems for SPAs, wellness centres and Jacuzzis. 1 - Lightweight extruded polystyrene panels with coated surfaces 2 - AQUAMASTER (first coat diluted with 10% water) 3 - AQUAMASTER (second coat) 4 - AQUAMASTER (third coat) 5 - LITOPLUS K55 6 - STARLIKE® or LITOCHROM 1-6 (joint grouting) 7 - OTTOPRIMER 1218 + OTTOSEAL S70

Waterproofing and ceramic or mosaic laying systems for balconies and terraces 1 - CONCRETE SLAB Perimeter joint 1 2 - VAPOUR BARRIER 3 - LITOCEM or LITOCEM 13 PRONTO SCREED (sloping) 4 - LITOBAND SK Self-Adhesive Drains Collar 5 - AQUAMASTER (first coat diluted with 10% water) 6 - AQUAMASTER (second coat) 7 - AQUAMASTER (third coat) 8 - SUPERFLEX K77 9 - WATERPROOFED EXPANSION JOINT 10 - STARLIKE® or LITOCHROM 3-15 (joint grouting) 11 - LITOGAP 12 - LITOSIDE 13 - OTTOPRIMER 1216 + OTTOSEAL S70 (expansion joint)

Litokol spa Via G. Falcone, 13/1 42048 Rubiera (RE) - Italy Tel. +39 0522 622811 Fax +39 0522 620150 [email protected] www.litokol.it