The protective barrier against water for all situations

Aquamaster Evo is the fibre-reinforced ready-to-use liquid membrane that does not require any preparation. Once applied, it transforms into an elastic and impermeable membrane. 2

Single component ready-to-use product that does not require any preparation Fibre-reinforced, maximum elasticity and resistance, even at very low temperatures Does not require reinforcing mesh or fabric Does not require sealing bands to protect corners Quick-drying, application of multiple coats just a short time apart Possibility to install coverings after just 24 hours Applicable with smooth steel trowel, roller or brush Reusable product, no waste, if correctly stored can be reused even after months

wet areas terraces and balconies underfloor heating industrial floors Innumerable application fields: FLOORS AND WALLS INTERIORS AND EXTERIORS Aquamaster Evo has innumerable fields of application such as for example: swimming pools wellness centres

fields of application cement screeds Suitable substrates: Cement screeds Cementitious self-levellers/levellers Existing tiles Gypsum Concrete Fibre cement slabs Gypsum-based plasters Aerated concrete Cement plasters Wood panels Underfloor heating systems Lightweight panels Blocks of cement cement plasters cement levellers existing tiles wooden panels

The benefits of Aquamaster EVO ✓ very low VOC emission rate world’s leading manufacturer of antimicrobial hygienic functions and material protection for textiles and polymers. Compliant with class EC1PLUS according to the EMICODE protocol and class A+ (Émission dans l’air intérieur - French regulations) product. Any leftover material, if stored in the original packaging at temperatures between +5°C and +35°C, can be reused even after months, thus avoiding wastage ✓ The fast drying time allows the application of multiple coats just a short time apart, making it possible to complete waterproofing...

All regulatory requirements satisfied so as not to let a single drop of water through Aquamaster EVO complies with class DM 02P for liquid applied water impermeable products in dispersion with improved crack-bridging capacity at very low temperature (-20°C) and resistant to contact with chlorinated water according to European standard EN 14891 relating to liquid applied impermeable products for use beneath ceramic tiling bonded with adhesives. Aquamaster EVO is classified as DM 02P according to standard EN 14891 DM= normal dispersion liquid applied water impermeable products 02= with improved...

Crack-bridging capacity for totally safe installation The term crack-bridging expresses the capacity of a waterproofing membrane to resist the propagation of cracking from the substrate based on its elasticity, thus maintaining the sealing properties of the waterproofed surface unaltered. Standard EN 14891 establishes a crack-bridging requirement of at least 0.75 mm measured in conditions of standard temperature, low temperature (-5°C - class 01) and very low temperature (-20°C - class 02). • Crack-bridging capacity in normal conditions according to EN 14891-A.8.3: ≥ 0.75 mm • Crack-bridging...

Quick-drying application of multiple coats a short time apart Easy roller Roller application

Installation 24 h after last coat Third coat after 4 h Second coat after 30’ First coat diluted with 10% water Fast application • Second coat after 30’ • Third coat after 4 h • Surface can be tiled after 24 h with cementitious adhesives in class C2 or reactive in class R2 (EN 12004) Comparison of application thickness The performance being equal, Aquamaster EVO requires half the thickness of a normal two-component cementitious membrane. Aquamaster EVO (three coats, final thickness of dry material 0.8 - 1 mm.) Two-component cementitious membrane (two coats with reinforcing mesh, total thickness...

Installation of mosaics and tiles after just 24 hours since the last coat of Aquamaster EVO Coverings can be installed after just 24 hours since the last coat. Ceramics, natural stones or mosaics can be installed with cementitious adhesives in class C2 or reactive in class R2 according to UNI EN 12004. The choice of adhesive depends on the size of the tiles and expected operating conditions. In the case of large tiles (side > 60 cm), it is preferable to use deformable adhesives in class S1 or highly deformable adhesives in class S2. The tiles must be installed with a solid bed using the back-buttering...

APPLICATION DATA CONSUMPTION (kg/m2) PERFORMANCE Ready-to-use product without the need for any preparation. Solid content Total thickness Roller, brush or smooth steel trowel Application temperatures Waiting time between coats 1st coat (diluted to 10% with water): 30 minutes Waiting time between coats Waiting time for installation of covering With water when product is fresh. Mechanically when product has hardened. Cement screeds, Litocem/Litocem Pronto-based screeds Cementitious skim coats, Litoplan Smart, lightweight panels with cementitious levelling layers Gypsum, wood panels, concrete, fibre...

Waterproofing of bathrooms/showers 1 – Substrate 2 – Self-Adhesive Drain Collar 3 – Aquamaster EVO (1st coat diluted at 10%) 4 – Aquamaster EVO (2nd coat) 5 – Litoband SK Pipes Collar 6 – Aquamaster EVO (3rd coat) 7 – Adhesive in class C2 / R2 8 – Tile / Mosaic 9 – Starlike EVO / EpoxyElite EVO / StyleGrout 10 –

Waterproofing of balconies and terraces 1 - Concrete slab 2 - Vapour barrier 3 - Screed in Litocem or Litocem Pronto (Sloping) 4 - Litoband SK Self-adhesive drains collar 5 - Aquamaster EVO (First coat diluted with 10% water) 6 - Aquamaster EVO (Second coat) 7 - Aquamaster EVO (third coat) 8 - Superflex K77, Hyperflex K100, Litoplus K55, Powerflex K50, Rapidflex K91 9 - Waterproofed divider joint 10 - Starlike® EVO or Stylegrout Tech or 3-20 (joint grouting) 11 - Litogap 12 - Litoside 13 - Ottoprimer 1216 + Ottoseal S70 (perimeter joint)