INFORMATION SHEET LISTONE GIORDANO DECKING OUTDOOR WOOD FLOORS Listone Giordano outdoor decking is a raised structure consisting of wooden planks fixed to an aluminium substructure by means of an original and patented mechanical system. The JuAn® fixing system consists of clips made of a special synthetic material resistant to temperature changes and weathering. It makes it possible to halve the laying times and to perform the various operations without using screwdrivers, nails and screws. This system is also suitable for wall application. BOARDS IN SOLID WOOD FOR PANELING DECKING BOARDS IN SOLID WOOD ANGLE BRANCKET SUBSTRUCTUREELEMENTS WITH PRE-ASSEMBLED jUAN® CLIPS Margaritelli S.p.A. – Fraz. Miralduolo 06089 Torgiano - Perugia - Italy - Tel. +39.075.988.681 Fax +39.075.988.90.43 - [email protected] www.listonegiordano.com

CHARACTERISTICS WOOD DECKING BOARDS The convex profile represents the best solution in terms of comfort, dimensional stability and water runoff from the surface. The longitudinal incisions on the back of the planks allow fast jointing to the substructure and gives great stability against twisting. Solid decking boards are supplied in Ash from Fontaines, Tek two-layer and Ipe. to the aluminium substructure, assure perfect for easier installation, inspection nd routine CLIPS The JuAn® Clips in high resistance polyoxymethylene for outdoor use, perfectly anchored tightness of the boards to the substructure....

DURABILITY OF OUTDOOR WOOD The durability of wood is defined as the capacity to withstand the attacks of wood decay. Biological durability can be natural (as the case of Teak and Ipe) if conferred by naturally extracts of wood, or induced (as the case of Heat treated Ash) if conferred by a specific treatment. The long lasting of a wooden deck depends on the biological durability of the wood, also from the constructive characteristics and from the weather conditions where it is built. Class of durability and class of use for outdoor use are defined by international standard specifications. DIMENSIONAL...

INFORMATION SHEET HEAT TREATMENT OF WOOD Wood, in the form of raw material, is subjected to a cycle of drying, constant temperature treatment and final conditioning. The treatment temperature, applied according to a specific quality regulation, favors the development of spontaneous reactions without chemical products addition. This process favors the evolution of wood chemical structure and the consequent elimination of hemicellulose and simple sugars. The absence of nutritional resources for the growth of pathogens and the low hygroscopic of the material avoid the biological decay and make the...

LISTONE GIORDANO DECKING Decking Ash 90 and 120 Heat-treated Ash from Fontaines The respect of the environment and the sustainable management of the resources are the main values guiding the development of the heat-treated Ash, a widespread wood species in the French forests, features ideal technical characteristics and mechanical resistance. The steam heat-treatment, chemicals-free, improves the durability and dimensional stability of the product required for outdoor application. Brushing enhances the surface of heat-treated wooden floors, highlighting the beauty of the fibres and making it...

INFORMATION SHEET Decking Teak 135 It’s a two layer decking for outdoor use. It uses a series of patented technologies deriving from research and Listone Giordano experience in the field of two layers flooring with birch plywood. It’s composed of a top layer in Teak and a birch plywood support for a total thickness of 23 mm. The union is made by high performance adhesives which exceed the requirements of JAS Type II test (immersion for 2 hours in hot water at 70°C and subsequent exposure in a laboratory oven with forced ventilation at 60°C for 3 hours). Characterized by a wood fibre with a golden...

INFORMATION SHEET Decking Ipé 90 and 135 Ipè is a wood specie native of South America, traditionally used all over the world for outdoor flooring. Its high resistance against mechanical stresses and its high content of natural extractives make this wood specie particularly suitable for highly stressed pedestrian areas in which an excellent biological durability of outdoor woods is required. The quality control of wood moisture content and the rational relationship between width and thickness of the boards give a good dimensional stability of Ipé decking floor. All this in the full compliance...

INFORMATION SHEET SUBSTRUCTURE DECKING FIXED HEIGHT KIT 40 Fixed height substructure in aluminium with pre-assembled clips JuAn®. It is the basic solution for flooring on consolidated plans and waterproofing sheath. It promotes drainage of rainwater parallel to the substructure only. Picture 1: cross section of wooden planks laid solid aluminium substructure KIT 40 fixed height Picture 2: longitudinal section of the planks in solid fixed aluminium substructure KIT 40 fixed height Distance between boards mm (f) Height substructure mm (support quota) (h) Total height thickness mm (H) Aluminium...

INFORMATION SHEET outdoor KIT 50 Substructure fixed height in aluminium with rubber shims and clips JuAn® pre-assembled fixing system for installation of floorings on solid surfaces. It allows drainage of rainwater in all directions. The rubber shims can cushion the noise generated by the solicitation exerted on the structure. FIXING ON THE GROUND: Fixing the structure is not compulsory. It is possible to fix the aluminium substructure KIT 50 to the ground, predrilling the rails and using screws 7,5x70 mm. The number of screws is variable between 2.5-3.0 pcs/sqm and distanced along the substructure...

INFORMATION SHEET outdoor KIT 60 Substructure fixed height in aluminium with rubber shims and clips JuAn® pre-assembled. For installation of floors on solid surfaces and waterproofing sheet. It promotes drainage of rainwater in all directions. The rubber shims can cushion the noise generated by the solicitation exerted on the structure. FIXING ON THE GROUND: Fixing the structure is not compulsory. It is possible to fix the aluminium substructure KIT 50 to the ground, predrilling the rails and using screws 7,5x70 mm. The number of screws is variable between 2.5-3.0 pcs/sqm and distanced along...