LINZMEIER building elements Over-rafter insulation system Optimum insulation with robust sarking membrane LINITHERM PAL Polymer with robust edge joints and highly tear-resistant polymer-bituminous membrane. Simple, fast, and cost-effective method for a seam and perforation-secure sarking membrane. Maximum insulation with minimum panel thickness Polyurethane (PUR/PIR) rigid foam provides maximum insulation (TCL 023) with minimum panel thickness. PUR/PIR is rot proof, extremely pressure-resistant and therefore unsusceptible to the weight of snow, wind force and aging. Rainproof sub-roof, from 14° pitch Homogenous, full-surface thermal insulation TCL 023 Positive eco-balance With integrated vapour barrier Suitable as a temporary roof covering

LINZMEIER building elements LINITHERM PAL Polymer DN ≥14° Insulation core: Top coat: LINITHERM PAL Polymer and wood boarding on rafters Edge joints: EN description: Overall dimension: PUR/PIR rigid foam acc. to DIN EN 13165, class E, coated with aluminum film on both sides = vapour barrier High-grade, tear-resistant polymer sheet, lengthwise and transverse overlapping about 8 cm, with integral sealing edge Tongue-and-groove pressfit joints all sides, additional lengthwise t&g clipped joint with 6 cm overlap PUR - EN 13165-T2-DS(TH)9-CS(10\Y)100 3000 x 1000 mm (= calculation measurement) LINITHERM...