LINITHERM® HIEMMHI insulation systems building elements insulation system The insulation system with minimum scrap for fast installation on the rafters LINITHERM PAL tongue & groove boards with specially designed edge joints. Cut-offs that occur when insulating covings and dormers are simply turned over and fitted on the opposite side - finished. That saves material and time. iiMvo^n^ r*xp-rstpf-i>j_ riijp&tspfJ-q^ y. j_ ^ -f- J M Thermal insulation and underlay aximum insulation with minimum board thickness Reliable insulation ... Protection from electrosmog With integrated vapour With special edge joints With anti-glare surface With printed grid Full-surface, uniform thermal Installed directly on rafters summer, prevents heat loss Insulation core made of PUR/PIR rigid foam Positive ecobalance Permanently high insulation value TCL 023 Protection from heat and cold without thermal bridges Suitable as a temporary roof covering

LINZMEIER building elements LINITHERM PAL tongue & groove DN ≥20° Insulation core: Edge joints: LINITHERM PAL tongue & groove on rafters Please note: EN description: Overall dimension: PUR/PIR rigid foam acc. to DIN EN 13165, class E, coated with aluminum film on both sides = vapour barrier Tongue & groove pressfit joints on all sides, plus additional tongue & groove on the long sides with 6 cm overlap Joint sealing tape 1060 x 40 mm for sealing the short sides (included in delivery) PUR-EN 13165-T2-DS(TH)9-CS(10\Y)100 3000 x 1000 mm (= calculation measurement) Thickness mm PUR/PIR LINITHERM PAL tongue...