LINZMEIER building elements Under-rafter insulation system Interior wall insulation The slim interior insulation for perfect living comfort The ideal insulation under the rafters You save heating costs, gain additional living space, and protect the environment. Excellent insulation value – TCL 022 Installation directly under the rafters Minimum panel thickness for maximum living space Interior facing ready for rendering and wallpapering Full-surface, uninterrupted thermal insulation With integrated vapour barrier No additional battens required Protects from electrosmog Perfect design from a structural point of view Environmentally compatible material properties: PUR/PIR rigid foam, free of formaldehyde and fibers Positive ecobalance

LINZMEIER building elements Building without a construction site Living comfort under the roof Living space is limited and expensive. The attic offers additional space, and the conversion is worthwhile even with roof pitches down to 12° (and sufficient knee wall height). With a roof inclination of 50°, even two floor levels are possible in the attic. If a new roof is to be built, insulation above the rafters is recommended. Where this is not possible, LINITHERM elements under the rafters provide additional airtight insulation simply, quickly, in a minimum of space, and without thermal bridges....

LINZMEIER building elements NEW BUILDINGS Combined thermal insulation between and under the rafters or collar beams Heat loss through the rafters Additional space, lower heating costs LINITHERM PAL GKL with integrated battens With insulation only between the rafters, thermal bridges exist due to the higher thermal conductivity of wood. For adequate insulation, larger rafter cross-sections are necessary. This leads to higher material costs and loss of space. Moreover, the additional battens and plasterboard facing reduce the living space even more. With insulation between the rafters and LINITHERM...

LINZMEIER building elements LINITHERM PAL GK Under the rafters Partial insulation between rafters Insulation core: Facing: Edge joints: Overall dimension: LINITHERM PAL GK Under the rafters Full insulation between rafters LINITHERM PAL GK Under the rafters LINITHERM PAL 2 Under the rafters Full insulation between rafters PUR/PIR rigid foam acc. to DIN EN 13165, class E, coated with aluminum film on both sides = vapour barrier Inside with plasterboard 9.5 mm thick (ready for rendering and wall-papering) Thickness from 39.5 to 69.5 mm: Tongue-and-groove pressfit joints on all sides Thickness from...