ARMCHAIR HIGH BACK MOËL Designer Inga Sempé Dimensions Height 970 mm | Width 1,150 mm | Depth 980 mm | Seat height 410 mm Technical characteristics CONSTRUCTION Structure in thermoformed ABS (a combination of elastomer and resin which results in a highly durable plastic), clad in polyether foam 26 kg/m3 - 5.7 kPa. Decorative rear feet covered to match frame. COMFORT Integral seat cushion in high resilience polyurethane Bultex foam 32 kg/m3 - 2.8 kPa with a comfort layer in Bultex foam 26 kg/m3 - 1.4 kPa. Quilted seat cushion in Bultex foam 26 kg/m3 - 1.4 kPa. Integral back cushion with headrest (for hight back version only), lumbar and armrests in Bultex foam 26 kg/m3 - 1.4 kPa clad in 200 g/m2 polyester quilting. Footstools in Bultex foam 48 kg/m3 - 5.3 kPa. MAKING-UP Back and seat covers quilted with bands of 300 g/m2 polyester quilting, giving a strikingly structured visual effect. Covers of footstool quilted with 200 g/m2 polyester quilting. Rear of More information on www.ligne-roset.com

back is in the shape of the corolla of a flower, and is held in place by metallic zips: this can be made up in Kyoto or Oregon hides or Divina or Coda fabrics. Covers are held in place by velcro and zips, and are fully removable. FABRICS 'Inside' covers are ordered independently of the exterior 'corolla', thus making bicolour (or bimaterial) interpretations a possibility. Footstools can also be bicolour: Inga Sempé recommends using the same covering material on the sides of the footstool and the corolla of the armchair or settee, and a different one for the front, back and top of the footstool...