Multifunctional

Product catalog summary

Overview: This document provides technical specifications and assembly instructions for LIGNATUR box and surface elements, focusing on their multi-functional applications in construction, including fire resistance, soundproofing, and heat insulation.

Specifications:

Fire Resistance: Elements are categorized by fire resistance ratings such as REI30, REI60, and REI90, indicating their ability to withstand fire for 30, 60, or 90 minutes respectively.
Multi-functional Elements: Both box and surface elements are designed for various applications, offering structural support and insulation.

Assembly Procedures:

LIGNATUR Box Elements (LKE): The first element is positioned and screwed to the bearing on the tongue side. Subsequent elements are slid into place without gaps and horizontally screwed at intervals of 1.5m to 2.0m.
LIGNATUR Surface Elements (LFE): The first element is vertically screwed to the bearing through the middle webs. Additional elements are laid with a joint and secured to the bearing.

Protection and Maintenance:

Elements must be protected from humidity and weather during and after assembly. Climate conditions should be controlled, and emergency sealing applied at the end of each workday.
Emergency drainage positioning must be confirmed with the construction manager.

Legal Notice: The document specifies that legal claims from the use of the provided data are excluded, and duplication is only permitted with written approval from Lignatur AG.

Catalog excerpts

Assembly instructions LIGNATUR box element (LKE) • Fit in the first element, position and screw to the bearing on the tongue side. • Slide the next element to the previous one without leaving a joint, and screw together. Horizontal screw connection of the elements at a distance of approx. 1.5m — 2.0m LIGNATUR surface elements (LFE) in the first element, position and screw verti- cally to the bearing through the middle webs. • Lay another element leaving the joint provided and screw to the bearing. • Fit LIGNATUR elements have to be protected during and after assembly from humidity and weather...

Open the catalog to page 2

Surface element

Open the catalog to page 5

Surface element

Open the catalog to page 6

Surface element

Open the catalog to page 7

Surface element Legal claims resulting from the use of the data provided here are excluded. Duplication of this document or excerpts thereof is permitted only upon specific approval in writing

Open the catalog to page 8

Multifunctional

Multifunctional

Catalog excerpts

All Lignatur catalogs and technical brochures