LightON 4
LightON 4
The 2 Gang / 1 Way touch switch is designed to control two lighting circuits without requiring a neutral wire at the switch. It features a touch control mechanism for intuitive operation.
- Ensure the power is switched off at the distribution board before starting any work.
- Clip the mechanism onto its support, following the indicated installation orientation.
- Attach the glass panel from top to bottom, ensuring the tab is at the bottom, and confirm the circuit is off before fitting.
- If the LED lights up red, verify the wiring connections.
- To reset, press and hold the button until two beeps are heard.
- Manufacturer: Livolo
- Reference: T02
- Dimensions: 45 × 45 × 35 mm
- Switch Type: 1-way touch switch
- Warranty: 2 years
- Number of Circuits: 2 lighting circuits
- Rated Voltage: 220–240 V AC, 50/60 Hz
- Rated Current: 5 A per circuit
- Maximum Load: 2000W
- Minimum Load: 5W
- Operating Temperature: -10°C to +40°C
- Permissible Humidity: up to 95%
- Connection Type: Screw terminal
- Cable Cross-section: 1.5 to 2.5 mm²
- Stripping Length: 6 mm
- Certifications: CE & RoHS
- Compatible with round or square flush-mount back boxes ≥ 40 mm.
- Suitable for horizontal or vertical installation.
- Designed for use on existing standard electrical installations.
- No neutral wire required at the switch; neutral required only at the light fitting.
- Compatible with LED and halogen lighting.
- Tempered glass faceplate available in Glossy or Matte finish.
- Metal mounting frame.
- N (neutral) = blue
- L (line) = any wire except blue and green/yellow
- PE (earth) = green/yellow
300 avenue des Mattes ZI Athélia 1 | 13600 La Ciotat | www.lighton-solutions.com
Catalog excerpts
2 Gang / 1 Way touch switch Reference: T02 Description Touch control mechanism designed to operate two lighting circuits simply and intuitively, with no neutral wire required at the switch. General specifications Installation & compatibility • Compatible with round or square flush-mount back boxes > 40 mm • Suitable for horizontal or vertical installation • For use on existing standard electrical installations • No neutral wire required at the switch (neutral required only at the light fitting) • Halogen lighting • A tempered glass faceplate, available in Glossy or Matte finish, and a metal mounting frame Technical specifications • Manufacturer Livolo • Switch type 1-way touch switch • Number of circuits 2 lighting circuits • Rated current 5 A per circuit • Connection type screw terminal Wiring diagram & installation best practices Clip the mechanism onto its support, making sure to follow the indicated installation orientation Make sure the circuit is switched off before fitting the glass panel. If the LED lights up and remains red, check the wiring connections. L (line) = any wire except blue and green/yellow 300 avenue des Mattes ZI Athelia 1 | 13600 La Ciotat | www.lighton-solutions.com © 2026 LightON - All rights reserved. Any reproduction, in whole or in part, is prohibited without
Open the catalog to page 1All LightON catalogs and technical brochures
LightON 181 Page
LightON 161 Page
LightON 141 Page
LightON 121 Page
LightON 101 Page
LightON 81 Page
LightON 61 Page
LightON 21 Page
- Contemporary switch
- Recessed switch
- Industrial socket
- Plate
- Square switch
- Contemporary socket
- Industrial plug socket
- Metal switch
- Industrial thermostat
- Push-button switch
- Wall-mounted socket
- Recessed socket
- Multiple socket
- White thermostat
- White switch
- White socket
- Black socket
- Programmable thermostat
- Multimedia socket