• Ensure the power is switched off at the distribution board before starting any work.
• Attach the mechanism to its support, following the indicated installation orientation.
• Secure the glass panel from top to bottom, ensuring the tab is at the bottom. Confirm the circuit is off before fitting the glass panel.
• If the LED remains red, verify the wiring connections.
• To reset, press and hold the button until two beeps are heard.

• The 2-gang touch push-button switch is designed to control two lighting circuits via an impulse relay.

• Manufacturer: Livolo
• Reference: T02H
• Dimensions: 45 × 45 × 35 mm
• Type: 2-gang touch push-button switch (momentary)
• Warranty: 2 years
• Number of circuits: 2 lighting circuits
• Rated voltage: 220–240 V AC, 50/60 Hz
• Rated current: 5 A per circuit
• Maximum load: 2000W
• Minimum load: 5W
• Operating temperature: -10°C to +40°C
• Permissible humidity: up to 95%
• Connection type: screw terminal
• Cable cross-section: 1.5 to 2.5 mm²
• Stripping length: 6 mm
• Certifications: CE & RoHS

• Wiring Diagram & Best Practices: N (neutral) = blue, L (line) = any wire except blue and green/yellow, PE (earth) = green/yellow.

• Compatible with round or square flush-mount back boxes ≥ 40 mm.
• Suitable for horizontal or vertical installation.
• For use on existing standard electrical installations.
• No neutral wire required at the switch.
• Suitable applications include impulse relay, automation system, home automation control, and relay logic input.

• Requires a tempered glass faceplate, available in Glossy or Matte finish, and a metal mounting frame.

300 avenue des Mattes ZI Athélia 1 | 13600 La Ciotat | www.lighton-solutions.com

© 2026 LightON – All rights reserved. Any reproduction, in whole or in part, is prohibited without prior written permission.