Complete 1 button 2 Way touch switch white, glossy Reference: PP-T01S-A11B Description Choose a ready-to-install solution with this 2-way touch switch, supplied complete with its mechanism, metal mounting frame and glossy white tempered glass faceplate. General specifications Wiring diagram & installation best practices Detailed composition 1 complete touch switch • 1 x 1-button 2-way touch switch ref. T01S • 1 x 1-button glass faceplate, white, glossy ref. A-C1-11B General specifications • Manufacturer Livolo 1-button 2-way touch switch specifications • Reference T01S • Number of circuits 1 lighting circuit 1-button glass faceplate, white, glossy specifications • Reference A-C1-11B • Main material tempered glass • Colour white • Finish glossy • Type touch faceplate Installation & compatibility • Compatible with round or square flush-mount back boxes > 40 mm • Suitable for horizontal or vertical installation • For use on standard electrical installations • No neutral wire required at the switch, neutral required only at the light fitting • Compatible lighting LED and halogen lighting Clip the mechanism onto its support, making sure to follow the indicated installation orientation Make sure the circuit is switched off before fitting the glass panel. If the LED lights up and remains red, check the wiring connections. To reset the mechanism, press and hold the button until you hear two beeps. L (line) = any wire except blue and green/yellow 300 avenue des Mattes ZI Athelia 1 | 13600 La Ciotat | www.lighton-solutions.com © 2026 LightON - All rights reserved. Any reproduction, in whole or in part, is prohibited without prior written permission.