Glass faceplate 2 buttons, white, glossy Description 2-button glass touch faceplate designed to bring a modern, elegant and perfectly integrated finish to your wall-mounted wiring accessories. General specifications Technical specifications • Manufacturer Livolo • Reference A-C2-11B • Dimensions 80 × 80 × 4 mm • Main material tempered glass • Colour white • Finish glossy • Warranty 2 years • Type touch faceplate • Number of circuits 2 • CE & RoHS Installation & compatibility • Compatible with 2-button touch switches • Installation on metal mounting frame • Compatible with round or square flush-mount back boxes ≥ 40 mm To be completed with • All 2-button touch mechanisms • Mechanism sold separately Installation best practices Switch off the power at the distribution board before carrying out any work. Make sure the circuit is switched off before fitting the glass panel. Clip the mechanism onto its support, making sure to follow the indicated installation orientation. If the LED lights up and remains red, check the wiring connections. Clip the glass panel into place from top to bottom, with the tab at the bottom. To reset the mechanism, press and hold the button until you hear two beeps. L (line) = any wire except blue and green/yellow 300 avenue des Mattes ZI Athélia 1 | 13600 La Ciotat | www.lighton-solutions.com © 2026 LightON – All rights reserved. Any reproduction, in whole or in part, is prohibite