Double glass faceplate 1+1 buttons, white, glossy Description Designed to elegantly frame two touch switches side by side, this tempered glass faceplate provides a modern and harmonious wall integration. General specifications Technical specifications • Manufacturer Livolo • Reference A-C1/C1-11B • Dimensions 151 × 80 × 4 mm • Main material tempered glass • Colour white • Finish glossy • Warranty 2 years • Type touch faceplate • Configuration 2 × 1 circuit • CE & RoHS Installation & compatibility • Compatible with 2 one-button touch switches • Installation on metal mounting frames • Compatible with round or square flush-mount back boxes ≥ 40 mm • Suitable for horizontal or vertical installation To be completed with • All one-button touch mechanisms • Mechanism sold separately Installation best practices Switch off the power at the distribution board before carrying out any work. Make sure the circuit is switched off before fitting the glass panel. Clip the mechanism onto its support, making sure to follow the indicated installation orientation. If the LED lights up and remains red, check the wiring connections. Clip the glass panel into place from top to bottom, with the tab at the bottom. To reset the mechanism, press and hold the button until you hear two beeps. L (line) = any wire except blue and green/yellow 300 avenue des Mattes ZI Athélia 1 | 13600 La Ciotat | www.lighton-solutions.com © 2026 LightON – All rights reserved. Any reproduction, in whole or in part, is prohib