LIFT MB1100, MB1400 & MB1700 the flexible adjacent lifts
LIFT MB1100, MB1400 & MB1700 the flexible adjacent lifts
Product Overview
The MB1100, MB1400, and MB1700 are flexible adjacent lifts designed and manufactured by Herkules Liftwerk GmbH in Germany. These lifts provide independent living solutions by enabling wheelchair accessibility over various lifting heights, suitable for overcoming up to nine or more steps inside or outside buildings.
Key Specifications
- Lifting Heights: MB1100 - 1100 mm, MB1400 - 1400 mm, MB1700 - 1700 mm (up to 1790 mm with pit installation)
- Passage Width: 900 mm
- Lift Dimensions: Width 1280 mm, Length 1630 mm
- Clearance Height: 60 mm or 95 mm depending on ramp or surface level installation
- Loading Capacity: Up to 300 kg
- Lifting Speed: Approximately 20 mm/s
- Power Supply: 230 V / 50 Hz, 16 A with max power consumption of 0.25 kW
Design and Construction
The lifts feature a high-quality stainless steel construction that is resistant to heat, frost, rain, and wind, ensuring durability in outdoor environments. The flat design allows installation directly on level ground or surface-leveled, minimizing space usage and enabling near-invisible integration into traffic areas.
Optional pit installation allows for increased lifting height (up to 1790 mm) and includes features such as a drain in the middle of the pit. The concrete slab for installation should be flat, horizontal, and at least 150 mm thick (C20/25 grade), capable of supporting the lift weight plus additional loads.
Installation and Safety Features
- Installation requires a flat, horizontal ground surface with a maximum surface load of 4 kN/m².
- Maximum gap between platform and upper exit is 20 mm to ensure safe wheelchair transfer.
- Safety clearances of more than 100 mm to other parts such as railings are mandatory.
- Depending on lifting height and installation, fall protection at the upper station is recommended, with the MB door suggested for enhanced safety.
- Entrances are typically located between the motors, but all sides can be used as access or exit points. Special orders allow up to three ramps.
Control and Operation
- The lift can be controlled via handheld control, radio remote control, or a smartphone app using Bluetooth connectivity.
- Sensor buttons are waterproof, vandal-resistant (IK08 protection class), and respond to very light touch.
- Optional features include an automatic barrier at the lower station and a door at the upper station for added safety.
Special Versions and Flexibility
The lifts can be installed with surface-level trafficability from up to three sites simultaneously, allowing flexible access and saving space. An adjacent exit option is available, enabling the lift to turn and exit to the left or right, facilitated by a large turn-around area.
Dimensions and Technical Drawings
Detailed dimension sheets are provided for each model (MB1100, MB1400, MB1700), including pit dimensions, lift dimensions, and installation requirements. The pit depths vary (60 mm for MB1100, 90 mm for MB1400 and MB1700). The drawings specify concrete slab requirements, fixing methods (heavy-duty dowels), and cable connection points.
Standards and Compliance
- The lifts comply with the Machinery Directive 2006/42/EG (CE conformity).
- Manufacturing tolerances and surface quality adhere to DIN standards (e.g., DIN 2768-1, DIN ISO 1302).
Additional Components
Various call button designs are available, including surface-mounted and flush-mounted versions, with or without keys for security. Doors can be manual or equipped with automatic openers, designed with ergonomic swing ranges and safety features.
Summary of Critical Parameters
| Parameter | MB1100 | MB1400 | MB1700 |
|---|---|---|---|
| Lifting Height (mm) | 1100 (up to 1160 with pit) | 1400 (up to 1419 with pit) | 1700 (up to 1740 with pit) |
| Optional Pit Depth (mm) | 60 | 90 | 90 |
| Surface Load Max (kN/m²) | 4 | 4 | 4 |
| Power Supply | 230 V / 50 Hz, 16 A | ||
| Max Power Consumption (kW) | 0.25 | ||
| Loading Capacity (kg) | 300 | ||
| Lifting Speed (mm/s) | ~20 | ||
| Passage Width (mm) | 900 | ||
Best Practices and Recommendations
- Ensure installation ground is flat and horizontal with adequate concrete slab thickness and strength.
- Install fall protection at the upper station based on lifting height and site conditions.
- Use recommended MB door for enhanced safety and compliance.
- Consider optional adjacent exit for flexible access configurations.
- Utilize the smartphone app or radio control for convenient operation.
For more detailed technical information, installation instructions, and customization options, visit www.liftwerk.de.
Catalog excerpts
specIaL VersIons We offer solutions perfectly fitting for your needs. With the surface level installation comes a trafficablility from up to three sites at the same time. Therefore the lift could be installed nearly invisible into the traffic way and creates more free space the maximum of using variety. adjacenT exIT On demand, an adjacent exit is also possible. The lift could be turned and the exit would be to the left or to the right - the large turn-around-area makes it possible. Individual wishes? Contact us! LIFT TYpe LIFTInG HeIGHT Clearance height: 60/95 mm Lifting height: up to 1700*/1790 mm Lift length: 1630 mm Revision 09/2018 - Subject to technical changes the flexible adjacent lifts HerKuLes LIFTwerK made in Germany Herkules Liftwerk GmbH Industriestraße 3 34260 Kaufungen Tel 0561 9539970 Fax 0561 95399799 www.liftwerk.de Leben. Unabhängig. Leben. Unabhängig.
Open the catalog to page 1
lift mB1100, mB1400 & mB1700 adjacent exit with up to 1790 mm lifting height Waterproof sensor buttons with vandalism portection class IK08 and A lock key Controllable by radio or app via Bluetooth Straight or kg adjacent exit uncounTaBLe VersIons on THe sMaLLesT space The maximum lifting heights of the MB1100, MB1400 and MB1700 overcome up to nine or more steps in or outside the house. Thanks to their flat designed systems, the three versions with different lifting heights could be placed directly on the level ground, if required also surface leveled. The high-quality stainless steel construction...
Open the catalog to page 2
Clearance height 1274 Lift - Dimension Lifting height 1100 mm Optional pit depth 60 mm The installation ground has to be flat and horizontal. Surface load is max 4 kN/m² Power supply: 230 V/50Hz, 16 A Maximum power consumption 0,25 kW Lifting speed: approx. 20 mm/s Maximum gap width between the platform and the upper exit: 20 mm Safety clearances to other parts (e .g. railings): > 100 mm Lift Dimension In standard, the entrance is between the motors. All sides are usable as an access/exit. (Special orders with up to 3 ramps are possible) Depending on the actual lifting height and the installation...
Open the catalog to page 3
When installed in a pit, a drain can be placed in the middle. Bottom plate flat, without sloping. Ferroconcrete 150 mm thick C20/25, graining 0/16 Ground level (alternatively 60 mm sunk for ground level installation of the lift) Substruction by choice, depending on the subfont Strain of concrete slab approx. 380 kg weight of the lift, max. 350 kg additional load IF NOT DEFINED OTHERWAYS: DIMENSIONING IN MILLIMETRE SURFACE CONDITION: MARGINS. LINEAR: ANGLE: SURFACE QUALITY: TRIMMING AND REMOVING SHARP EDGES Lift will be fixed on the ground with heavy - duty dowels Dimension and info sheet for...
Open the catalog to page 4
Lift Dimension Clearance height Lifting height 1400 mm Optional pit depth 90 mm The installation ground must be flat and horizontal. Surface load is max 4 kN/m² Power supply: 230 V/50Hz, 16 A Maximum power consumption 0,25 kW Lifting speed: approx. 20 mm/s Maximum gap width between the platform and the upper exit: 20 mm Safety distances to other parts (e. g. railings): > 100 mm In standard, the entrance is between the motors. All sides are usable as an access/exit. (Special orders with up to 3 ramps are possible) Depending on the actual lifting height and the installation situation, a fall protection...
Open the catalog to page 5
When installed in a pit, a drain can be places in the middle. Bottom plate flat, without sloping. Ferroconcrete 150 mm thick C20/25, graining 0/16 Ground level (alternatively 90 mm sunk for ground level installation of the lift) Substruction by choice, depending on the subfont Strain of concrete slab approx. 400 kg weight of the lift, max. 350 kg additional load IIF NOT DEFINED OTHERWAYS: DIMENSIONING IN MILLIMETRE SURFACE CONDITION: MARGINS: LINEAR: ANGLE: SURFACE QUALITY: TRIMMING AND REMOVING SHARP EDGES Lift will be fixed on the ground with heavy - duty dowels Dimension and info sheet for...
Open the catalog to page 6
Lift Dimension Lift Dimension Clearance height Lifting height 1700 mm Optional pit depth 90 mm The installation ground has to be flat and horizontal. Surface load is max 4 kN/m² Power supply: 230 V/50Hz, 16 A Maximum power consumption 0,25 kW Lifting speed: approx.. 20 mm/s Maximum gap width between the platform and the upper exit: 20 mm Safety clearances to other parts (e. g. railings): > 100 mm In standard, the entrance is between the motors. All sides are usable as an access/exit. (Special orders with up to 3 ramps are possible) Depending on the actual lifting height and the installation situation,...
Open the catalog to page 7
When installed in a pit, a drain can be placed in the middle. Bottom plate flat, without sloping. Ferroconcrete 150 mm thick C20/25, graining 0/16 Ground level (alternatively 90 mm sunk for ground level installation of the lift) Substruction by choice, depending on the subfont Strain of concrete slab approx. 450 kg weight of the lift, max. 350 kg additional load IF NOT DEFINED OTHERWAYS: DIMENSIONING IN MILLIMETRE SURFACE CONDITION: MARGINS: LINEAR: ANGLE: SURFACE QUALITY: TRIMMING AND REMOVING SHARP EDGES Lift will be fixed on the ground with heavy - duty dowels Dimension and info sheet for...
Open the catalog to page 8
F Central connection point on ground Lift Control-section "down" MB-Door without motor DIN-left (The connection gets mirrored with DIN-R) MB-Door with motor DIN-left (The connection gets mirrored with DIN-R) Central connection point on ground Attention: Picture can differ from the original Herkules Liftwerk GmbH Industriestraße 3 34260 Kaufungen Tel : +49 561 953997-0 EMail: [email protected] WENN NICHT ANDERS DEFINIERT: BEMASSUNGEN IN MILLIMETER OBERFLÄCHE : DIN ISO 1302 TOLERANZEN : DIN 2768-1 m STANZEN : DIN 6930 g KALTBIEGEN : DIN 6935 Werstückkanten nach DIN 6784 Aussen: - 0,5 Innen : + 0,5...
Open the catalog to page 9
WENN NICHT ANDERS DEFINIERT: BEMASSUNGEN SIND IN MILLIMETER OBERFLACHENBESCHAFFENHEIT: TOLERANZEN: LINEAR: WINKEL: ENTGRATEN UNDSCHARFE KANTEN BRECHEN GENEHMIGT PRODUKTION QUALITAT
Open the catalog to page 10
zing range motor arm WENN NICHT ANDERS DEFINIERT: BEMASSUNGEN SIND IN MILLIMETER OBERFLACHENBESCHAFFENHEIT: TOLERANZEN: LINEAR: WINKEL: ENTGRATEN UNDSCHARFE KANTEN BRECHEN ZEICHNUNG NICHT SKALIEREN NAME gezeichnet Bartsch GEPRUFT GENEHMIGT PRODUKTION QUALITAT
Open the catalog to page 11All Liftwerk catalogs and technical brochures
LIFT MB850 maximum flexibility19 Pages
- Ventilation controller
- Wall-mounted ventilation controller
- Industrial management software
- Door automation
- Lifting platform
- Professional lifting platform
- Home automation system remote control
- Outdoor lifting platform
- Disabled lifting platform
- Smartphone software
- Building lifting platform
- Indoor lifting platform
- Wheelchair lifting platform
- Automated lifting platform
- Home automation system software
- Swing door automation
- Building automation system remote control