Wheeled Excavator A 916 ` litronic Operating Weight: 16,400 – 18,400 kg Engine: 115 kW / 156 HP Stage IV Bucket Capacity: 0.17 – 1.05 m3

Technical Data Hjf, Diesel Engine Hydraulic System Rating per ISO 9249 115 kW (156 HP) at 1,800 RPM Type Bore / Stroke Engine operation 4-stroke diesel Common-Rail turbo-charged and after-cooler reduced emissions Air cleaner dry-type air cleaner with pre-cleaner, primary and safety elements Engine idling sensor controlled Electrical system Voltage 24 V Stage IV Harmful emissions values Emission control in accordance with 97/68/EG stage IV Liebherr-SCR technology Liebherr particle filter Fuel tank Urea tank J=r Cooling System Diesel engine water-cooled compact cooling system consisting cooling...

Cab ROPS safety cab structure (roll-over protection system) with individual windscreens or featuring a slide-in subpart under the ceiling, work headlights integrated in the ceiling, a door with a sliding window (can be opened on both sides), large stowing and depositing possibilities, shock-absorbing suspension, sounddamping insulating, tinted laminated safety glass, separate window shades for the sunroof window and windscreen Operator’s seat Standard air cushioned operator’s seat with 3D-adjustable armrests, headrest, lap belt, seat heater, manual weight adjustment, adjustable seat cushion...

Stick Two-piece boom 5.05 m Mono boom 5.00 m blade + 2 pt. outriggers blade + 2 pt. outriggers outriggers outriggers Stick Offset two-piece boom 5.00 m Offset mono boom 4.90 m Stabilizer Blade 4 pt. Stabilizer Blade 4 pt. blade + 2 pt. outriggers blade + 2 pt. outriggers outriggers outriggers Dimensions are with attachment over steering axle Attachment over digging axle for shorter transport dimensions

Digging Envelope with quick coupler Digging Forces without quick coupler Max. breakout force with ripper bucket 114.0 kN (11.6 t) Operating Weight The operating weight includes the basic machine with 8 tyres plus intermediate rings, two-piece boom 5.05 m, stick 2.45 m, quick coupler SW33 and bucket 850 mm / 0.60 m3. I Buckets Machine stability per ISO 10567* (75 % of tipping capacity) * I ndicated loads are based on ISO 10567 and do not exceed 75 % of tipping or 87 % of hydraulic capacity, max. stick length without quick coupler, lifted 360° on firm with blocked oscillating axle 1)

with Two-Piece Boom 5.05 m In longitudinal position of undercarriage * Limited by hydr. capacity The lift capacities on the load lift hook of the Liebherr quick coupler SW33 without working tool are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 360° with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+ / - 15°) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. The values...

with Two-Piece Boom 5.05 m In longitudinal position of undercarriage * Limited by hydr. capacity The lift capacities on the load lift hook of the Liebherr quick coupler SW33 without working tool are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 360° with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+ / - 15°) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. The values...

The lift capacities on the load lift hook of the Liebherr quick coupler SW33 without working tool are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 360° with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+ / - 15°) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. The values apply when the adjusting cylinder is in the optimal position. Indicated loads based on the ISO...

with Two-Piece Boom 5.05 m EW-Undercarriage In longitudinal position of undercarriage * Limited by hydr. capacity The lift capacities on the load lift hook of the Liebherr quick coupler SW33 without working tool are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 360° with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+ / - 15°) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers...

with Mono Boom 5.00 m Digging Envelope with quick coupler Digging Forces without quick coupler Max. breakout force with ripper bucket 114.0 kN (11.6 t) Operating Weight The operating weight includes the basic machine with 8 tyres plus intermediate rings, mono boom 5.00 m, stick 2.45 m, quick coupler SW33 and bucket 850 mm / 0.60 m3. Undercarriage versions I Buckets Machine stability per ISO 10567* (75 % of tipping capacity) Stabilizer blade Stabilizer blade raised Stick length (m) down Stick length (m) + 2 pt. outriggers down Stick length (m) * Indicated loads are based on ISO 10567 and do...

with Mono Boom 5.00 m In longitudinal position of undercarriage * Limited by hydr. capacity The lift capacities on the load lift hook of the Liebherr quick coupler SW33 without working tool are stated in metric tons (t) and are valid on a firm, level supporting surface with blocked oscillating axle. These capacities can be slewed through 360° with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+ / - 15°) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated loads...