System Construction The Skyvane system has been designed to shade horizontal, inclined and irregular shaped glazing. The system is extremely versatile and can be installed internally (in its 50, 75 and 80mm versions) or externally (75 and 80mm only). As a result, Skyvane not only gives extremely good light control, often in situations where no alternative can be used, but also solar control when installed externally. In such situations, up to 90% of solar heat gain can be excluded from the building, allowing substantial savings in air conditioning costs - both initial capital costs and on-going...

Motor Fixing Edge Rack Detail Standard support Edge pivots angled to suit Slat clip Drive shaft Standard rackarm Heavy Duty Rackarm Standard Rackarm DESIGN PARAMETERS Model - (dimensions in mm) Type 650 Type 675/675X Type 680/680X Heavy Duty Standard Heavy Duty Standard Heavy Duty General Layout

Design Parameters Dim. Description (dimensions in mm) W Max length of slat L Max length of rackarm X Max distance between rackarms Y Max slat overhang Z Max support spacing (standard) Z Max support spacing (heavy duty) WxL Max area gearbox operation (m2) WxL Max area motorised operation (m2) 3 Year Warranty Testing The Skyvane 680x System has been tested in the wind tunnel at the Building Research Establishment. Versions of the blind have been tested in wind speeds of up to 50 m/s (180kmh or 112.5 mph), giving evidence of the rigidity of the system, providing that the installation is designed...