ELECTRONIC CONTROL SYSTEMS Introduction Levolux designs, manufactures and installs a wide range of blinds and shading systems for both internal and external applications. With the move towards naturally ventilated buildings, the optimisation of natural daylight and the use of clear glazing, the installation of effective shading systems has assumed increasing importance. An increasing number of these shading systems are motorised, allowing them to be easily adjusted in response to the prevailing conditions. More frequently, a control system is also being specified to allow the shading system to...

TEMP In/Out MANUAL CONTROL SENSOR INPUTS RADIO CONTROL VENETIAN BLIND ROLLER BLIND TENSION BLIND TILTING FIN (Glass/Timber/Aluminium) Standard Multicontroller software allows the automatic operation of blinds in the following configurations:– Roller and tensioned systems – fabrics deployed and retracted automatically. Skyvane (non-retractable blinds) – continuous adjustments of slats to maintain a specific light level. Venetian and Vertical blinds – open, closed and up to 3 intermediate tilt positions. Glass/Timber/Aluminium fins – continuous adjustment of slats to maintain a specific light level...

ELECTRONIC CONTROL SYSTEMS Typical Levolux Multicontroller Operating Four Zones Mains Supply Group Switches (Auto/Manual) Levolux Multicontroller Specification 2A to drive internal circuits 10A total for motor drives Enclosure Inputs IP54 (IP65 available) Polycarbonate with ABS base 280(h) x 280(w) x 154(d) mm Incorporating keypad and 80 character lcd display 8 bit resolution Wind 1 Input 5V Alarm - Fire, Intruder 4 Inputs Auto/Manual Switch 8 Inputs Volt free contacts Outputs 8 Relays Blind Group 230VAC 16(4) A (fused to 2A) 4 Relays Auto Indication direct 5 V led drive and 24VAC/DC...