Lenzlinger Sons Ltd. | Uster (Switzerland) | Shanghai (China) Phone +41 58 944 53 53 | www.lenzlinger.ch P00.272 | 022009 Subject to technical alterations Synthetic coverings Final cleaning after construction has been completed, initial cleaning Remove coarse and fine dirt with a vacuum cleaner. Wipe with damp gauze, cloth or with a well-wrung mop and synthetic soap. Do not use coated wiping waxes. On-going cleaning Vacuum clean or wipe with damp gauze or cloth. Intermediate cleaning, basic cleaning Spray clean using machine and suitable pad. Polish electrical conductible coverings with high-speed machines. Important information These coverings are sensitive to fat-soluble dyes (e.g. shoe creams, “neocolor”, asphalt) which penetrate the covering. Aggressive solvents such as ester and ketone can partially dissolve the covering. Do not use coated cleaning products for electrical conductible synthetic coverings. Linoleum Linoleum is made of natural materials. Oxidised linseed oil is used to produce linoleum with the addition of resins, organic fillers, cork/wood dust and dyes prepared into a hot mass and pressed onto a jute underlay under high pressure. Most linoleum coverings have a building protection layer. The building protection layer must not be removed when they are treated for the first time. Final cleaning after construction has been completed, initial cleaning Remove coarse and fine dirt with a vacuum cleaner. Wipe with a damp gauze, cloth or a well-wrung mop. On-going cleaning Wipe with damp cloth, clean the floor surface with damp wiping equipment in lines or oscillating movements. Intermediate cleaning, basic cleaning Use sprays sparingly with a machine and then work in using a circular motion. Important information Sensitive to strong alkaline cleaning products (e.g. soft soap or solvent-based cleaner), also to abrasive pads and brushes. Rubber Final cleaning after construction has been completed, initial cleaning Remove coarse and fine dirt with a vacuum cleaner. Wipe with a damp gauze, cloth or a well-wrung mop and synthetic soap. Do not use coated cleaning waxes. On-going cleaning: Vacuum or wipe with damp gauze or cloth. Intermediate cleaning, basic cleaning Spray clean with machine and suitable pad. Important information Do not use extremely alkaline cleaning products (e.g. soft soap, soda etc.). Do not use solvents or waxes containing solvents. Cleaning hard coverings | 10210