GENERAL CARD TECHNICAL PARAMETERS CHARACTERISTICS Ingress protection: Nominal power [W]: Luminous flux [lm]*: Colour temperature [K]: Colour rendering index: Electrical protection class: Material of the body: Diffuser material: Light distribution type: Battery: Autotest: Working temperature [°C]: Mounting version: CNBOP certificate: Warranty [years]: *Tolerance +/- 10% IP65; 1.00; 2.00; 130 - 260 5000; >70; II; PC; PMMA; general; corridor; open space; NiMh; tak from +5 to +35; surface; 3216/2018; 2 / 0.5 (battery); Surface mounted autonomous emergency luminaire with integrated, energy-saving LED GO! light panel. Body made of polycarbonate (PC]. Optical system available in 3 variants: basic, corridor, open space. Luminaire is fitted with batteries with 1h, 2h or 3h emergency operation time. The luminaire is using Ni-Mh or Ni-Cd battery with voltage of 3.6V and 24 hours of full charge with manual or automatic test function (AT). Available versions: M - maintained, NM- non-maintained, AT - autotest. Autonomous emergency luminaire is mainly used for illumination of escape routes and fire protection devices after power failure, i.e. in emergency mode. Especially recommended everywhere, where it is necessary to install emergency lighting within the scope of modernization of existing system. Successfully replaces luminaires with embedded emergency module. Due to additional sealing, the luminaire achieves IP65 tightness and may be used in places with increased humidity or outdoors under the roofing.

GENERAL CARD Click >> index, to see details

GENERAL CARD Operating mode LUMINOUS INTENSITY DISTRIB. CURVE The company reserves the right to make design changes or upgrades in the presented product. Product data sheet does not constitute an offer. Revision date: 2020-11-12 Lena Lighting S.A. ul. Kórnicka 52 63-000 Środa Wielkopolska The luminaire complies with the EU ROHS Directive 2011/65/UE This product is a subject to electric and electronic waste equipment regulations (WEEE). 43/2017