ALE A25-60
2Pages

ALE  25-60 A Automatic, retractable stainless steel bollard, 600 mm high, Ø200 mm Simplified installation with little civil engineering Technical compartment included in the chassis, accessible on the bollard, with no operation: easy access to safety devices Stainless steel housing and rolling plate, microbead blasted treatment, to ensure durability and resistance to urban environments Hydraulic system equipped with check valve couplers, ensuring clean operations (no oil leak) “Plug and connect” product ready for installation New generation electronic control logic - ONE-C SECURED SITES Power supply CRASH TEST Computer crash test certified resistance carried out by an independent body approved by COFRAC: can stop a 1.5T vehicle launched at 48 km/h • Speed: 48 km/h • Weight: 1 T 500 • Kinetic energy: 133 000 joules • Penetration: 0 MAIN CHARACTERISTICS • Automatic steel bollard, Ø25 cm, 60 cm high • Intensive operating, up to 3,000 manoeuvres/day • Resistant to cycle disruptions • Built-in hydraulic motor • ONE-C control logic • Bright LED red strip TECHNICAL CHARACTERISTICS • Steel cylinder, 100 mm thick • Anti-corrosion treatment • Interchangeable sleeve, stainless steel, microbead blasted treatment • Class 2 reflective strip • Massive stainless steel bollard top cover • Load-bearing chassis, very thick steel, with reinforcements, guiding system and low end stops - with anti-corrosion treatment • Galvanised steel casing box • M10 stainless steel screws • Low viscosity variation biodegradable oil • Provided with a 10m connecting cable towards the control logic; equipped with fast IP67 connector Dispatcher box, with pre-installed cables, accessible without dismantling the bollard Built-in hydraulic Resistance without distortion (joules) MCBF (number of cycles) MTBF (hours) MTTR (minutes) Supply line included 10 m of cable per bollard, 20 m as an option, additional distance on request Paint / finish Stainless steel sleeve, microbead treatment Floor plate measurements Temperature conditions *according to test conditions **subject to complia

ALE  25-60 A OPTIONS Safety • Traffic lights posts • Emergency operation: remains in position in case of power loss (EV, NF) • Presence detection on magnetic loop Customisation • Specific RAL colour (housing only) • Brushed stainless steel finish (housing only) • Heating resistance in case of severe cold or exposure to snow or frost conditions Installation • Controlling box • Technical totem • Control unit cabinet For more information, contact us at +33 (0) 4 78 86 02 86 - contact@lbagroup.fr or visit www.grouplba.com 112 (concrete foundation + finish) Drainage layer or connection to the...