Cross-line and 5-point laser with hand receiver mode and magnetic wall bracket Rev.0316 – Green laser technology – xtremely bright green laser cross at front in the E DLD design achieves high-quality lines as well as a clean and clear and therefore easily visible line image. – The 5 laser points are placed each in 90° on the horizontal and vertical level of the laser lines. On the edges of the laser lines there are formed 3 intercept points out of laser line and point. – The plum and ceiling points allow markings to be easily transferred from the floor to the ceiling. – The magnetic wall bracket allows the unit to be used as a stand-alone device or in combination with other devices – on walls and attached to magnetic objects – deal for mounting on drywall construction I profiles – Automatic Level: automatic alignment by virtue of a magnetic pendulum system. – ilt mode is an additional feature that T permits gradients to be laid out. – Individually switchable laser lines – Out-Of-Level: Is indicated by optical and acoustic signals when the unit is outside its self-levelling range. – GRX-Ready: in combination with the optional laser receiver, the integrated hand-held receiver mode permits detection of laser lines at long distances and under unfavourable light conditions. – Transport lock: A pendelum lock protects unit during transport. TECHNICAL DATA ACCURACY 2 mm per 10 m SELF-LEVELLING RANGE ± 3° LASER WAVELENGTH line lasers green 510 nm plumb laser red 635 nm LASER line lasers, class 2 < 1 mW POWER SUPPLY 4 x 1.5V alkaline batteries OPERATING TIME approx. 3,5 hrs WORKING TEMPERATURE 0°C … +45°C STORAGE TEMPERATURE -10°C … +70°C WATER AND DUST PROTECTION IP 54 WEIGHT 550 g (without wall bracket) DIMENSIONS ACL 2 XPG 130 x 105 x 70 mm (W x H x D) AutoCross-Laser 2 XPG Stand-alone device or in combination: wall- and clamp holder Height and position of the measuring device easily adjustable including carrying case + magnetic wall bracket + batteries UMAREX GmbH & Co. KG . Donnerfeld 2 . 59757 Arnsberg . Germany . Tel. +49 2932 638-300 . Fax +49 2932 638-3