Ecoponto waste separation bin | éco-point | ecoponto design Larus EN Beach Eco Points, providing an effective adaptation to seaside locations, with good sized bins in appealing colours. FR Éco-points de plage, cherchant une adaptation correcte aux zones balnéaires, avec de bonnes dimensions et des couleurs attirantes. PT Ecopontos de praia, procurando a correcta adaptação às zonas balneares, com dimensões consideráveis e cores apelativas.

2021-A Ecoponto waste separation bin | éco-point | ecoponto waste separation bin 105L éco-point 105L ecoponto 105L area for placing graphics zone de placement des graphiques área para colocação de grafismo EN Structure: rotomolded plastic [LR1] Security lock: no Ashtray: no Garbage disposal: recycled plastic inner container [LR1] Capacity: 105L Information: painting or cut vinyl Fixing: [LF1] Refer to technical section at the end of the catalog Standard: Metallization (mounting structure) Métallisation (structure de fixatión) Metalização (estrutura de fixação) Larus registers its products Larus...

remarks remarques notas pictogram list liste des pictogrammes legenda de pictogramas metallized cast iron fonte métallisée ferro fundido metalizado glulam bois lamelée madeira lamelada cast aluminium fonte aluminium alumínio fundido particleboard aggloméré de bois aglomerado de madeira rotomolded plastic plastique rotomoulé plástico rotomoldado phenolic resin (HPL) résine phénolique (HPL) resina fenólica (HPL) toutes les pièces en fonte sont métallisées, fonte galvanisée n’est pas possible; sandwich panel panneau sandwich painel sandwich todas as peças em ferro fundido são metalizadas, galvanização...

material references références des matériaux referências de materiais steel S275JR galvanized and painted acier S275JR galvanisé et peint aço S275JR galvanizado e pintado steel S275JR metallized and painted acier S275JR acier métallisée et peint aço S275JR metalizado e pintado washed concrete béton lavé betão lavado LR1 rotomolded plastic in polyethylene resin plastique rotomoulé avec résine de polyéthylène plástico rotomoldado com resina de polietileno LAC1 corten steel A S 335 J2 G2W acier corten A S 335 J2 G2W aço corten A S 335 J2 G2W LAL1 LCM1 marine plywood contreplaqué pin maritime contraplacado...

Galvanization Galvanisation Galvanização Wood Bois Madeira Pour chaque utilisation, il faut employer EN Protection of the surface, obtained by EN Wood is one of the most important the immersion in a bath of zinc (min 98% les bois possédant les caractéristiques building materials and requires an energy of pure zinc) at about 450 °C. The zinc conseillées, et faire également appel à des comsumption for its production (5 to 7.5 metallurgically reacts with the metal surface traitements de préservation. KWH / Ton) much lower than other materials of the piece. The thickness of the zinc layer Après abattage,...

Cracks and warping in wood Fentes et Gauchissements (bois) Fendas e Empenos na madeira EN When hitting one side of the timber, the sun and wind remove the surface water. The water in the interior will come to the surface at a speed slower than its removal from the surface. The peripheral layers (more dry) shrink more than the inner layers (more humid), creating internal tensions that are relieved with the opening of cracks that soften when the external humidity increases. In the case of a board, warping is caused by the contraction of the dried layers, contrary to the opposite side, that doesn´t...

Steel / Stainless Steel Acier / Acier Inox Aço / Aço inox Cast Iron Fonte Ferro Fundido EN Steel (EN10025) is an alloy combining iron and carbon, with a maximum carbon content of approx. 2.1%. With low carbon content (<0.3%), has a high ductility and good characteristics for the mechanical work and welding. Stainless steel, contain at least 11% of chromium, ensuring a high resistance against corrosion, forming a thin adhesive film, which protects the material from corrosive attacks in contact with water or moist air (AISI 304). With the appropriate additions of chromium, nickel and molybdenum,...

Electricity Electricité Electricidade Rotomolding Rotomoulage Rotomoldagem Public Lighting EN Thermic transformation process of Ensuring the safety of outdoor public spaces polymers (above a certain temperature), like (EN 13 201). LED lighting: color rendering polyethylene (PE), polypropylene (PP) or PVC. index (CRI> 75); color temperature to be The polymers powder is filled into a metallic defined; average life span 60.000h (highest); mould, which is exposed to a biaxial low energy consumption. movement and heated to a temperature which can go until 300ºC. Photovoltaic systems High temperature...